show forwarding-options hyper-mode

Syntax

Description

Display information about the hyper mode feature. After you configure the hyper mode feature, you must reboot the system for the network device (a router or a switch) to reflect the change. For instance, if you have configured hyper mode but not rebooted the system, the Current mode field displays normal while the Configured mode field displays hyper mode.

Note:

Since hyper mode is a chassis-specific feature, the show forwarding-options hyper-mode command on a guest network function (GNF) displays the hyper-mode status of the chassis (BSYS), not of the GNF. To know more about GNFs, see Components of Junos Node Slicing.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show forwarding-options hyper-mode command. Output fields are listed in the order in which they appear.

Table 1: show forwarding-options hyper-mode Output Fields
Field Name	Field Description
`Current mode`	Displays the current mode, either `normal` or `hyper mode`.
`Configured mode`	Displays the configured mode, either `normal` or `hyper mode`.

Sample Output