Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Example: Configuring Filtering of Frames by IEEE 802.1p Bits

For the bridge, any and vpls protocol families, MX Series router firewall filters can be configured to provide matching on IEEE 802.1p priority bits in packets with VLAN tagging:

  • To configure a firewall filter term that includes matching on IEEE 802.1p learned VLAN priority (in the outer VLAN tag), use the learn-vlan-1p-priority or learn-vlan-1p-priority-except match condition.

  • To configure a firewall filter term that includes matching on IEEE 802.1p user priority (in the inner VLAN tag), use the user-vlan-1p-priority or user-vlan-1p-priority-except match condition.

For more detailed information about configuring firewall filters and configuring filter match conditions for Layer 2 bridging traffic on the MX Series routers, see the Routing Policies, Firewall Filters, and Traffic Policers User Guide.

Note:

Layer 2 bridging is supported only on the MX Series routers. For more information about how to configure Layer 2 bridging, see the Routing Policies, Firewall Filters, and Traffic Policers User Guide.

This example Layer 2 bridging firewall filter finds any incoming frames with an IEEE 802.1p learned VLAN priority level of either 1 or 2, and then classifies the packet in the best-effort default forwarding class.

Note:

This example does not present exhaustive configuration listings for all routers in the figures. However, you can use this example with a broader configuration strategy to complete the MX Series router network Ethernet Operations, Administration, and Maintenance (OAM) configurations.

To configure filtering of frames by IEEE 802.1p bits:

  1. Configure the firewall filter filter-learn-vlan-configure-forwarding:

  2. Apply the firewall filter filter-learn-vlan-configure-forwarding as an input filter to ge-0/0/0: