Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Additional Features

We've extended support for the following features to these platforms.

  • Juniper Secure Connect application supports IPv6 addresses (SRX5000 line of devices, and vSRX 3.0 running the iked process). While connecting to the Juniper Secure Connect application, you can provide an IPv6 address or IPv4 address as the gateway address and assign an IPv6 address or IPv4 address to a remote-access user.

    Earlier Junos OS releases support only IPv4 addresses.

    Note that IPv6 address-assignment is only supported when using certificate or EAP-based authentication

    This feature is supported on the unified iked process using junos-ike package. The SRX5K-SPC3 card with RE3 comes with junos-ike package installed by default. You must run the command request system software add optional://junos-ike.tgz to load thejunos-ike package explicitly on SRX5K-SPC3 with RE2 and vSRX Virtual Firewall.

  • VLAN-level MACsec on logical interfaces (EX9253 and QFX5120-48YM)

    [See Media Access Control Security (MACsec) over WAN.]