EVPN
-
Support for EVPN routing policies on the MPC10E and MPC11E (MX240, MX480, MX960, MX2010, and MX2020)—Starting in Junos OS Release 21.4R1, Junos OS supports policy filter configurations for EVPN routes on the MX240, MX480, and MX960 routers with the MPC10E line cards and on the MX2010 and MX2020 routers with the MPC11E line cards. You can create policies and apply policy filters to import and export EVPN routes at a specific EVPN routing-instance level or at the BGP level if you want to apply the policy to all EVPN routing instances.
[See Routing policies for EVPN.]
Interconnecting EVPN-VXLAN data centers with EVPN-MPLS in a WAN using gateway nodes (MX-Series, EX9200, EX9252, EX9253)—Starting in Junos OS Release 21.4R1, you can interconnect EVPN-VXLAN data centers with EVPN-MPLS in a WAN using gateway nodes, but without using logical tunnel interfaces. In Release 21.4R1, you can interconnect only those BDs/VLANs that are on the interconnected VLAN list. Note that the gateway nodes in one data center will have connectivity by means of virtual tunnel end points (VTEPs), whereas gateway nodes must be able to handle EVPN-VXLAN encapsulation on the data center side and EVPN-MPLS on the WAN (data center interconnect) side.
EVPN interconnect CLI commands:set routing-instances <instance-name> protocols evpn interconnect interconnected-vlan-list [ <vlan-id1> <vlan-id2>]
set routing-instances <instance-name> protocols evpn interconnect encapsulation mpls
[See Technology Overview of VXLAN-EVPN Integration for DCI and Connecting Logical Systems Using Logical Tunnel Interfaces.]