show oam ethernet connectivity-fault-management interfaces
Syntax
show oam ethernet connectivity-fault-management interfaces
<ethernet-interface-name>
<level md-level>
<brief | detail | extensive>
Description
On M7i and M10i routers with Enhanced CFEB (CFEB-E), and on M320, MX Series, ACX Series, T320, and T640 routers, display IEEE 802.1ag Operation, Administration, and Management (OAM) connectivity fault management (CFM) database information for Ethernet interfaces.
In addition, for Ethernet interfaces on MX Series routers , also display any ITU-T Y.1731 frame delay measurement (ETH-DM) frame counts when detail or extensive mode is specified.
For Ethernet interfaces on MX Series routers, display any ITU-T Y.1731 synthetic frame loss measurement (ETH-SLM) statistics and frame counts.
Options
| brief | detail | extensive | (Optional) Specified level of output. |
| ethernet-interface-name | (Optional) CFM information only for CFM entities attached to the specified Ethernet interface. |
| level md-level | (Optional) CFM information for CFM identities enclosed within a maintenance domain of the specified level. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show oam ethernet connectivity-fault-management
interfaces command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
Interface |
Interface identifier. |
All levels |
Interface status |
Local interface status. |
All levels |
Link status |
Local link status. Up, down, or oam-down. |
All levels |
Maintenance domain name |
Maintenance domain name. |
detail extensive |
Format (Maintenance domain) |
Maintenance domain name format configured. |
detail extensive |
Level |
Maintenance domain level configured. |
All levels |
Maintenance association name |
Maintenance association name. |
detail extensive |
Format (Maintenance association) |
Maintenance association name format configured. |
detail extensive |
Continuity-check status |
Continuity-check status. |
detail extensive |
Ethernet-ais status |
Status of alarm indication signal (AIS). |
detail extensive |
Interval |
Continuity-check message interval. |
detail extensive |
Loss-threshold |
Lost continuity-check message threshold. |
detail extensive |
Interface status TLV |
Status of the interface status TLV, if configured on the MEP interface: none, up, down, testing, unknown, dormant, notPresent, lowerLayerDown |
detail extensive |
Port status TLV |
Status of the port status TLV, if configured on the MEP interface: none, no, yes |
detail extensive |
Connection Protection TLV |
Status of the connection protection TLV if configured on the MEP interface: no, yes If yes, then the transmitted connection protection TLV is decoded and the following three fields are displayed: Prefer me, Protection in use, FRR Flag |
detail extensive |
Prefer me |
If set to yes, the path through which CCM was transmitted is preferred (unless the path fails). It is used for signaling a manual-switch command to the remote side. Its value can be yes or no. |
detail extensive |
Protection in use |
Used for protection decision coordination. Its value is set to yes if the endpoint transmitting the CCM is currently transmitting the user traffic to protection path. Its value can be yes or no. |
detail extensive |
FRR Flag |
LSR/LER forwarding the CCM Frame into a bypass tunnel is set. Its value can be yes or no. |
detail extensive |
MEP identifier |
Maintenance association end point (MEP) identifier. |
All levels |
Neighbors |
Number of MEP neighbors. |
All levels |
Direction |
MEP direction configured. |
detail extensive |
MAC address |
MAC address configured for the MEP. |
detail extensive |
MEP status |
Indicates the status of the connectivity fault management (CFM) protocol running on the MEP: Running, inactive, disabled, or unsupported. |
detail extensive |
Remote MEP not receiving CCM |
Whether the remote MEP is not receiving connectivity check messages (CCMs). |
detail extensive |
Erroneous CCM received |
Whether erroneous CCMs have been received. |
detail extensive |
Cross-connect CCM received |
Whether cross-connect CCMs have been received. |
detail extensive |
RDI sent by some MEP |
Whether the remote defect indication (RDI) bit is set in messages that have been received. The absence of the RDI bit in a CCM indicates that the transmitting MEP is receiving CCMs from all configured MEPs. |
detail extensive |
Some remote MEP's MAC in error state |
Indicates whether the remote MEP’s MAC is in error state. |
detail extensive |
Alarm Indication Signal |
Indicates whether the AIS is triggered or is cleared. |
detail extensive |
CCMs sent |
Number of CCMs transmitted. |
detail extensive |
CCMs received out of sequence |
Number of CCMs received out of sequence. |
detail extensive |
LBMs sent |
Number of loopback request messages (LBMs) sent. |
detail extensive |
Valid in-order LBRs received |
Number of loopback response messages (LBRs) received that were valid messages and in sequence. |
detail extensive |
Valid out-of-order LBRs received |
Number of LBRs received that were valid messages and not in sequence. |
detail extensive |
LBRs received with corrupted data |
Number of LBRs received that were corrupted. |
detail extensive |
LBRs sent |
Number of LBRs transmitted. |
detail extensive |
LTMs sent |
Linktrace messages (LTMs) transmitted. |
detail extensive |
LTMs received |
Linktrace messages received. |
detail extensive |
LTRs sent |
Linktrace responses (LTRs) transmitted. |
detail extensive |
LTRs received |
Linktrace responses received. |
detail extensive |
Sequence number of next LTM request |
Sequence number of next LTM request to be transmitted. |
detail extensive |
1DMs sent |
If the interface is attached to an initiator MEP for a one-way ETH-DM session: Number of one-way delay measurement (1DM) PDU frames sent to the peer MEP in this session. For all other cases, this field displays 0. |
detail extensive |
Valid 1DMs received |
If the interface is attached to a receiver MEP for a one-way ETH-DM session: Number of valid 1DM frames received. For all other cases, this field displays 0. |
detail extensive |
Invalid 1DMs received |
If the interface is attached to a receiver MEP for a one-way ETH-DM session: Number of invalid 1DM frames received. For all other cases, this field displays 0. |
detail extensive |
Out of sync 1DMs received |
If the interface is attached to a receiver MEP for a one-way ETH-DM session: Number of out-of-sync one-way delay measurement request packets received. |
detail extensive |
DMMs sent |
If the interface is attached to an initiator MEP for a two-way ETH-DM session: Number of Delay Measurement Message (DMM) PDU frames sent to the peer MEP in this session. For all other cases, this field displays 0. |
detail extensive |
Valid DMMs received |
If the interface is attached to an initiator MEP for a two-way ETH-DM session: Number of valid two-way delay measurement request packets received. |
detail extensive |
Invalid DMMs received |
If the interface is attached to an initiator MEP for a two-way ETH-DM session: Number of invalid two-way delay measurement request packets received. |
detail extensive |
DMRs sent |
If the interface is attached to a responder MEP for a two-way ETH-DM session: Number of delay measurement reply (DMR) frames sent. For all other cases, this field displays 0. |
detail extensive |
Valid DMRs received |
If the interface is attached to an initiator MEP for a two-way ETH-DM session: Number of valid DMRs received. For all other cases, this field displays 0. |
detail extensive |
Invalid DMRs received |
If the interface is attached to an initiator MEP for a two-way ETH-DM session: Number of invalid DMRs received. For all other cases, this field displays 0. |
detail extensive |
LMM sent |
If the interface is attached to an initiator MEP for a ETH-LM session: Number of loss measurement message (LMM) PDU frames sent to the peer MEP in this session. |
detail extensive |
Valid LMM received |
If the interface is attached to an initiator MEP for a ETH-LM session: Number of valid loss measurement request packets received. |
detail extensive |
Invalid LMM received |
If the interface is attached to an initiator MEP for a ETH-LM session: Number of invalid loss measurement request packets received. |
detail extensive |
LMR sent |
If the interface is attached to a responder MEP for a ETH-LM session: Number of loss measurement reply (LMR) frames sent. |
detail extensive |
Valid LMR received |
If the interface is attached to an initiator MEP for a ETH-LM session: Number of valid LMR frames received. |
detail extensive |
Invalid LMR received |
If the interface is attached to an initiator MEP for a ETH-LM session: Number of invalid LMR frames received. |
detail extensive |
Valid AIS frames transmitted |
Number of valid AIS frames transmitted to the peer MEPs. |
detail extensive |
Valid AIS frames received |
Number of valid AIS frames received from the peer MEPs. |
detail extensive |
|
If the interface is attached to an initiator MEP for a ETH-SLM session: Number of synthetic loss measurement (SLM) request packets transmitted from the source MEP to the remote or destination MEP in this session. |
|
|
If the interface is attached to a responder MEP for a ETH-SLM session: Number of valid SLM PDUs transmitted from the source MEP to the remote or destination MEP. |
|
|
If the interface is attached to a responder MEP for a ETH-SLM session: Number of invalid SLM PDUs transmitted from the source MEP to the remote or destination MEP. |
|
|
If the interface is attached to a responder MEP for a ETH-SLM session: Number detail extensive of synthetic loss reply (SLR) frames sent. |
|
|
If the interface is attached to an initiator MEP for a ETH-SLM session: Number of valid SLR PDUs that the source MEP received from the remote or destination MEP. |
|
|
If the interface is attached to an initiator MEP for a ETH-SLM session: Number of invalid SLR PDUs that the source MEP received from the remote or destination MEP. |
|
Remote MEP count |
Number of remote MEPs. |
extensive |
Identifier (remote MEP) |
MEP identifier of the remote MEP. |
extensive |
MAC address (remote MEP) |
MAC address of the remote MEP. |
extensive |
State (remote MEP) |
State of the remote MEP. |
extensive |
Interface (remote MEP) |
Interface of the remote MEP. |
extensive |
Sample Output
- show oam ethernet connectivity-fault- management interfaces
- show oam ethernet connectivity-fault- management interfaces detail
- show oam ethernet connectivity-fault- management interfaces detail (One-Way ETH-DM)
- show oam ethernet connectivity-fault- management interfaces detail (Connection Protection TLV Configured)
- show oam ethernet connectivity-fault- management interfaces extensive
- show oam ethernet connectivity-fault- management interfaces level
- show oam ethernet connectivity-fault- management interfaces (trunk ports)
show oam ethernet connectivity-fault- management interfaces
user@host> show oam ethernet connectivity-fault-management interfaces
Interface Link Status Level MEP Neighbors
Identifier
ge-1/1/0.0 Up Active 0 2 1
ge-1/1/0.1 Up Active 0 2 1
ge-1/1/0.10 Up Active 0 2 1
ge-1/1/0.100 Up Active 0 2 1
ge-1/1/0.101 Up Active 0 2 1
ge-1/1/0.102 Up Active 0 2 1
ge-1/1/0.103 Up Active 0 2 1
ge-1/1/0.104 Up Active 0 2 1
ge-1/1/0.105 Up Active 0 2 1
ge-1/1/0.106 Up Active 0 2 1
...show oam ethernet connectivity-fault- management interfaces detail
user@host> show oam ethernet connectivity-fault-management interfaces detail
Interface name: ge-5/2/9.0, Interface status: Active, Link status: Up
Maintenance domain name: md0, Format: string, Level: 5
Maintenance association name: ma1, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
MEP identifier: 1, Direction: down, MAC address: 00:90:69:0b:4b:94
MEP status: running
Defects:
Remote MEP not receiving CCM : no
Erroneous CCM received : yes
Cross-connect CCM received : no
RDI sent by some MEP : yes
Alarm Indication Signal : yes
Statistics:
CCMs sent : 76
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 1320235363
1DMs sent : 0
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 0
DMRs sent : 0
Valid DMRs received : 0
Invalid DMRs received : 0
LMM sent : 10
Valid LMM received : 20
Invalid LMM received : 0
LMR sent : 20
Valid LMR received : 10
Invalid LMR received : 0
Valid AIS frames transmitted : 0
Valid AIS frames received : 0
SLM sent : 10
Valid SLM received : 20
Invalid SLM received : 0
SLR sent : 20
Valid SLR received : 10
Invalid SLR received : 0
Remote MEP count: 2
Identifier MAC address State Interface
2001 00:90:69:0b:7f:71 ok ge-5/2/9.0
4001 00:90:69:0b:09:c5 ok ge-5/2/9.0show oam ethernet connectivity-fault- management interfaces detail (One-Way ETH-DM)
user@host show oam ethernet connectivity-fault-management interfaces detail
Interface name: ge-0/2/5.0, Interface status: Active, Link status: Up
Maintenance domain name: md6, Format: string, Level: 6
Maintenance association name: ma6, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
MEP identifier: 101, Direction: down, MAC address: 00:90:69:0a:48:57
MEP status: running
Defects:
Remote MEP not receiving CCM : no
Erroneous CCM received : no
Cross-connect CCM received : no
RDI sent by some MEP : no
Statistics:
CCMs sent : 1590
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 1542035464
1DMs sent : 10
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 0
DMRs sent : 0
Valid DMRs received : 0
Invalid DMRs received : 0
Remote MEP count: 1
Identifier MAC address State Interface
201 00:90:69:0a:43:94 ok ge-0/2/5.0
show oam ethernet connectivity-fault- management interfaces detail (Connection Protection TLV Configured)
user@hostshow oam ethernet connectivity-fault-management interfaces detail
Interface name: xe-6/2/0.0 , Interface status: Active, Link status: Up
Maintenance domain name: md6, Format: string, Level: 6
Maintenance association name: ma6, Format: string
Continuity-check status: enabled, Interval: 1s, Loss-threshold: 3 frames
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: yes
Prefer me: no, Protection in use: no, FRR Flag: no
MEP identifier: 1, Direction: down, MAC address: 00:19:e2:b1:14:30
MEP status: running
Defects:
Remote MEP not receiving CCM : no
Erroneous CCM received : no
Cross-connect CCM received : no
RDI sent by some MEP : no
Some remote MEP's MAC in error state : no
Statistics:
CCMs sent : 225
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 1244305646
1DMs sent : 0
Valid 1DMs received : 0
Invalid 1DMs received : 0
Out of sync 1DMs received : 0
DMMs sent : 0
Valid DMMs received : 0
Invalid DMMs received : 0
DMRs sent : 0
Valid DMRs received : 0
Invalid DMRs received : 0
LMMs sent : 0
Valid LMMs received : 0
Invalid LMMs received : 0
LMRs sent : 0
Valid LMRs received : 0
Invalid LMRs received : 0
Remote MEP count: 1
Identifier MAC address State Interface
2 00:90:69:7f:e4:30 show oam ethernet connectivity-fault- management interfaces extensive
user@host> show oam ethernet connectivity-fault-management interfaces extensive
Interface name: ge-5/2/9.0, Interface status: Active, Link status: Up
Maintenance domain name: md0, Format: string, Level: 5
Maintenance association name: ma1, Format: string
Continuity-check status: enabled, Interval: 100ms, Loss-threshold: 3 frames
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: no
MEP identifier: 1, Direction: down, MAC address: 00:90:69:0b:4b:94
MEP status: running
Defects:
Remote MEP not receiving CCM : no
Erroneous CCM received : yes
Cross-connect CCM received : no
RDI sent by some MEP : yes
Alarm Indication Signal : yes
Statistics:
CCMs sent : 76
CCMs received out of sequence : 0
LBMs sent : 0
Valid in-order LBRs received : 0
Valid out-of-order LBRs received : 0
LBRs received with corrupted data : 0
LBRs sent : 0
LTMs sent : 0
LTMs received : 0
LTRs sent : 0
LTRs received : 0
Sequence number of next LTM request : 1645032434
1DMs sent : 0
Valid 1DMs received : 0
Invalid 1DMs received : 0
DMMs sent : 0
DMRs sent : 0
Valid DMRs received : 0
Invalid DMRs received : 0
Valid AIS frames transmitted : 0
Valid AIS frames received : 0
SLM sent : 10
Valid SLM received : 20
Invalid SLM received : 0
SLR sent : 20
Valid SLR received : 10
Invalid SLR received : 0
Remote MEP count: 2
Identifier MAC address State Interface
2001 00:90:69:0b:7f:71 ok ge-5/2/9.0
4001 00:90:69:0b:09:c5 ok ge-5/2/9.0
show oam ethernet connectivity-fault- management interfaces level
user@host> show oam ethernet connectivity-fault-management interfaces level 7
Interface Link Status Level MEP Neighbors
Identifier
ge-3/0/0.0 Up Active 7 201 0
xe-0/0/0.0 Up Active 7 203 1
show oam ethernet connectivity-fault- management interfaces (trunk ports)
user@host> show oam ethernet connectivity-fault-management interfaces
Interface Link Status Level MEP Neighbors
Identifier
ge-4/0/1.0, vlan 100 Up Active 5 100 0
ge-10/3/10.4091, vlan 4091 Down Inactive 4 400 0
ge-4/0/0.0 Up Active 6 200 0
user@host> show oam ethernet connectivity-fault-management interfaces ge-4/0/0.0
Interface Link Status Level MEP Neighbors
Identifier
ge-4/0/0.0 Up Active 6 200 0
user@host> show oam ethernet connectivity-fault-management interfaces ge-4/0/1.0 vlan 100
Interface Link Status Level MEP Neighbors
Identifier
ge-4/0/1.0, vlan 100 Up Active 5 100 0
user@host> show oam ethernet connectivity-fault-management interfaces ge-10/3/10.4091 vlan 4091
Interface Link Status Level MEP Neighbors
Identifier
ge-10/3/10.4091, vlan 4091 Down Inactive 4 400 0
Release Information
Command introduced in Junos OS Release 8.4.
Support for ITU-T Y.1731 frame delay measurement added in Junos OS Release 9.5.
Support for ITU-T Y.1731 Ethernet synthetic frame loss measurement (ETH-SLM) added in Junos OS Release 13.2 for ACX Series and MX Series routers.