detection-time (BFD for PIM)
Syntax
detection-time {
threshold milliseconds;
}
Hierarchy Level
[edit protocols pim interface interface-name bfd-liveness-detection], [edit routing-instances routing-instance-name protocols pim interface interface-name bfd-liveness-detection]
Description
Enable BFD failure detection. The BFD failure detection
timers are adaptive and can be adjusted to be faster or slower. The
lower the BFD failure detection timer value, the faster the failure
detection and vice versa. For example, the timers can adapt to a higher
value if the adjacency fails (that is, the timer detects failures
more slowly). Or a neighbor can negotiate a higher value for a timer
than the configured value. The timers adapt to a higher value when
a BFD session flap occurs more than three times in a span of 15 seconds.
A back-off algorithm increases the receive (Rx) interval by two if
the local BFD instance is the reason for the session flap. The transmission
(Tx) interval is increased by two if the remote BFD instance is the
reason for the session flap. You can use the clear bfd adaptation command to return BFD interval timers to their configured values.
The clear bfd adaptation command is hitless, meaning that
the command does not affect traffic flow on the routing device.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 8.2.
Support for BFD authentication introduced in Junos OS Release 9.6.