dampen
Syntax
dampen minutes
Hierarchy Level
[edit logical-systems logical-system--name protocols mvpn mvpn-mode spt-only source-active-advertisement], [edit logical-systems logical-system--name routing-instances instance-name protocols mvpn mvpn-mode spt-only source-active-advertisement], [edit routing-instances protocols mvpn mvpn-mode spt-only source-active-advertisement], [edit routing-instances instance-name protocols mvpn mvpn-mode spt-only source-active-advertisement]
Description
Time to wait before re-advertising the source-active route (1 to 30 minutes).
After traffic on the ingress PE falls below the threshold set for min-rate, this is length of time that
resuming traffic must continue to exceed the min-rate before the ingress PE can
start re-advertising Source-Active A-D routes.
The default is 1 minute.
To verify that the value is set as expected, you can check whether the Type 5 (Source-Active
route) has been advertised using the show route table vrf.mvpn.0 command. It may take several minutes before you can see the changes in the Source-Active
A-D route advertisement after making changes to the min-rate.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.1.