show msdp

Syntax

Display Multicast Source Discovery Protocol (MSDP) information.

none	Display standard MSDP information for all routing instances.
brief \| detail	(Optional) Display the specified level of output.
instance `instance-name`	(Optional) Display information for the specified instance only.
logical-system (all \| `logical-system-name`)	(Optional) Perform this operation on all logical systems or on a particular logical system.
peer `peer-address`	(Optional) Display information about the specified peer only,

view

Table 1 describes the output fields for the show msdp command. Output fields are listed in the approximate order in which they appear.

Table 1: show msdp Output Fields
Field Name	Field Description	Level of Output
Peer address	IP address of the peer.	All levels
Local address	Local address of the peer.	All levels
State	Status of the MSDP connection: Listen, Established, or Inactive.	All levels
Last up/down	Time at which the most recent peer-state change occurred.	All levels
Peer-Group	Peer group name.	All levels
SA Count	Number of source-active cache entries advertised by each peer that were accepted, compared to the number that were received, in the format `number-accepted`/`number-received`.	All levels
Peer Connect Retries	Number of peer connection retries.	detail
State timer expires	Number of seconds before another message is sent to a peer.	detail
Peer Times out	Number of seconds to wait for a response from the peer before the peer is declared unavailable.	detail
SA accepted	Number of entries in the source-active cache accepted from the peer.	detail
SA received	Number of entries in the source-active cache received by the peer.	detail

The output for the show msdp brief command is identical to that for the show msdp command. For sample output, see show msdp.

Command introduced before Junos OS Release 7.4.