show msdp source
Syntax
show msdp source <instance instance-name> <logical-system (all | logical-system-name)> <source-address>
Description
Display multicast sources learned from Multicast Source Discovery Protocol (MSDP).
Options
| none | Display standard MSDP source information for all routing instances. |
| instance instance-name | (Optional) Display information for the specified instance only. |
| logical-system (all | logical-system-name) | (Optional) Perform this operation on all logical systems or on a particular logical system. |
| source-address | (Optional) IP address and optional prefix length. Display information for the specified source address only. |
Required Privilege Level
view
Output Fields
Table 1 describes
the output fields for the show msdp source command. Output
fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
Source address |
IP address of the source. |
/Len |
Length of the prefix for this IP address. |
Type |
Discovery method for this multicast source:
|
Maximum |
Source-active limit applied to this source. |
Threshold |
Source-active threshold applied to this source. |
Exceeded |
Number of source-active messages received from this source exceeding the established maximum. |
Sample Output
show msdp source
user@host> show msdp source Source address /Len Type Maximum Threshold Exceeded 0.0.0.0 /0 Configured 5 none 0 10.1.0.0 /16 Configured 500 none 0 10.1.1.1 /32 Configured 10000 none 0 10.1.1.2 /32 Dynamic 6936 none 0 10.1.5.5 /32 Dynamic 500 none 123 10.2.1.1 /32 Dynamic 2 none 0
Release Information
Command introduced before Junos OS Release 7.4.