destination (saegw system)
Syntax
destination {
peer-address address;
port port-number;
routing-instance instance-name;
source-address address;
}Hierarchy Level
[edit services mobile-edge gateways saegw system]
Description
Configure the destination address of the IPsec peer or content of communication point of aggregation (CC-PAG) peer on the user plane for lawful intercept data. The control plane provides the address of the Mediation and Delivery Function (MDF), but it might not provide the address of the IPsec peer, which you need to configure. This configuration is applicable to both 4G and 5G.
Currently, this configuration supports only IPv4 addresses.
If you configure the peer address, you must also configure the source address because you must define both endpoints of the IPsec tunnel. You can configure the routing instance independent of the source and peer address.
A change in the configuration takes effect only when the control plane deactivates and reactivates the lawful intercept task. Existing tasks maintain their original CLI-configured values.
Options
| peer-address address |
Address of the IPsec peer. |
| port port-number | TCP/UDP port number of the IPsec peer. |
| routing-instance instance-name | Name of the routing instance. |
| source-address address | Address of the user plane (SAEGW-U or UPF). |
Required Privilege Level
system
Release Information
Juniper Networks introduced this statement in Junos OS Release 22.2R1