p2mp (Protocols LDP)
Syntax
p2mp {
no-rsvp-tunneling;
recursive;
root-address root-address;
}
Hierarchy Level
[edit logical-systems logical-system-name protocols ldp], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols ldp], [edit protocols ldp], [edit routing-instances routing-instance-name protocols ldp]
Description
Enable point-to-multipoint MPLS LSPs in an LDP-signaled LSP.
Options
| no-rsvp-tunneling | (Optional) Disable LDP point-to-multipoint LSPs from using RSVP-TE LSPs for tunneling, and use LDP paths instead. Note:
The Starting in Junos OS Release 12.3R1, Junos OS provides support
for Multipoint LDP (M-LDP) for Targeted LDP (T-LDP) sessions with
unicast replication, in addition to link sessions. As a result, the
default behavior of M-LDP over RSVP tunneling is similar to unicast
LDP. However, because T-LDP is chosen over LDP and link sessions to
signal point-to-multipoint LSPs, the |
| recursive | (Optional)
Configure point-to-multipoint recursive parameters, including |
| root-address root-address | (Optional) Specify the root address of the point-to-multipoint LSP. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.2.
no-rsvp-tunneling option added in Junos OS Release
16.1R5.