sensor-based-stats (Junos Telemetry Interface)
Syntax
sensor-based-stats;
Hierarchy Level
[edit protocols ldp traffic-statistics], [edit protocols mpls]
Description
Enable the collection of certain statistics for the Junos telemetry interface. You must configure this statement when you configure a sensor to monitor and stream data for the following statistics:
LDP—Enable the collection of LDP traffic statistics. Use the
resourceoption at the[edit services analytics sensor sensor-name]hierarchy level to configure one of the LDP statistics sensors to stream data through UDP.MPLS—Enable the collection of LSP statistics. To enable a sensor to stream data for LSP statistics through UDP, include the
resource /junos/services/label-switched-path/usage/statement at the[edit services analytics sensor sensor-name]hierarchy level.
This statement is also available for IS-IS statistics on MX Series, PTX3000, and PTX5000 routers. For more information, see Understanding Source Packet Routing in Networking (SPRING) and sensor-based-stats (Protocols IS-IS).
For additional information about configuring these statistics sensors to stream data through gRPC, see Guidelines for gRPC and gNMI Sensors (Junos Telemetry Interface).
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 15.1F6.
Support at the [edit protocols mpls] hierarchy level
introduced in Junos OS Release 19.2R1 for ACX6360 routers.
Statement supported in Junos OS Evolved Release 19.1R1 on PTX10003 routers and QFX 10003 switches.
Support at the [edit protocols ldp traffic-statistics] hierarchy level introduced in Junos OS Release 20.2R1 for MX Series
routers and PTX Series routers.