Configure and Monitor 800ZR and 800G OpenZR+ Coherent Optics
Includes configuration and montoring procedures of 800ZR and 800G OpenZR+ coherent optics.
-
In configuration mode, go to the
[edit interfaces interface-name]hierarchy.[edit] user@host# edit interfaces interface-name
-
Include the speed statement at the
[edit interfaces interface-name]hierarchy level to configure the speed.[edit interfaces interface-name] user@host# set speed (800g | 400g);
-
Configure speed and channelization.
[edit interfaces interface-name] user@host# set number-of-sub-ports <number-of-sub-ports>
-
Configure a different application for a speed.
-
Change to the [edit interfaces interface-name optics-options].
[edit interfaces interface-name] user@host# edit interfaces interface-name optics-options
-
Execute
either of the following commands to change the application. Both the commands are
mutually exclusive and you cannot use them together.
user@host# set interfaces <interface-name> optics-options application hostid <hostid> mediaid <mediaid> [domainid <domainid>]
user@host# set interfaces <interface-name> optics-options appselid <appselid>
-
Change to the [edit interfaces interface-name optics-options].
-
[Optional] Configure output power in the
[edit interfaces interface-name optics-options]hierarchy level. If in channelized mode, you must use the first sub-port to configure output power.user@host# set interface et-<interface-name> optics-option tx-power <tx power>
Example:
user@host# set interfaces et-0/0/0:0 optics-options tx-power -10
-
Specify the wavelength of optics in nm. If in channelized mode, you must use the first
sub-port to configure wavelength.
[edit interfaces interface-name optics-options] user@host# set wavelength nm
Example:
user@host# set interfaces et-0/0/0:0 optics-options wavelength 1552.52
-
To view the current and historical performance metrics, use the
show interfaces transport pmcommand. See show interfaces transport pm.