Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show interfaces transport pm

Syntax

Description

Display diagnostic data, warnings, and alarms for transport performance monitoring interfaces.

Options

all Display information about both optics and OTN
optics Display information only about optics
otn Display information only about OTN
all Display information for the current 15-minute interval, the current day, the ninety-six 15-minute intervals, and the previous day.
current Display information only for the current 15-minute interval.
currentday Display information only for the current 24 hours
interval Display information only for the ninety-six 15-minute intervals
previousday Display information only for the previous day.

(all | interface-name)—Display information for all interfaces or only for the specified interface (for example, et-fpc/pic/port).

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show interfaces transport pm optics command. Fields are listed in the approximate order in which they appear.

Table 1: show interfaces transport pm Output Fields

Field Name

Field Description

Physical interface

Name of the physical interface.

Interval

The 15 minute interval for performance monitoring.

Suspect Flag

TRUE if the performance monitoring data for the interval appears to be inaccurate.

Reason

Reason for setting the suspect flag.

COUNT

Measured value.

THRESHOLD

Threshold value set.

TCA-ENABLED

Threshold crossing alert. Set to TRUE if enabled.

TCA-RAISED

TRUE if enabled and the value crosses the threshold.

Near End PM

Near end threshold crossing defect trigger. For more information about each trigger, see tca.

Far End PM

Far end threshold crossing defect trigger. For more information about each trigger, see tca.

FEC PM

Forwarding equivalence class threshold crossing defect trigger. For more information about each trigger, see tca.

BER PM

Bit error rate threshold crossing defect trigger. For more information about each trigger, see tca.

CURRENT

Current value measured.

PM

Performance monitor.

MIN

Minimum value measured.

MAX

Maximum value measured.

AVG

Average value.

Lane Chromatic dispersion

Residual chromatic dispersion measured.

Lane differential group delay

Measured differential group delay.

q Value

Measured Quality factor value.

SNR

Signal to noise ratio.

Tx output power

The transmit laser output power.

Rx input power

The laser’s received optical power.

Module temperature (Celsius)

The laser’s temperature.

Tx Laser bias current (0.1mA)

Magnitude of the laser bias power setting current. The laser bias provides direct modulation of laser diodes and modulates currents.

Rx Laser bias current (0.1mA)

Magnitude of the laser bias power setting current.

Carrier frequency offset (MHz)

Measured carrier frequency offset.

Table 2 lists the output fields for the show interfaces transport pm optics command for 400ZR optics. We have listed the output fields in the approximate order in which the output fields appear.

Table 2: show interfaces transport pm Output Fields for 400ZR Optics

Field Name

Field Description

Physical interface

Name of the physical interface.

Interval

The 15 minute interval for performance monitoring.

Suspect Flag

TRUE if the performance monitoring data for the interval appears to be inaccurate.

Reason

Reason for setting the suspect flag.

THRESHOLD

Threshold value set.

TCA-ENABLED

Threshold crossing alert. Set to TRUE if enabled.

TCA-RAISED

TRUE if enabled and the value crosses the threshold.

CURRENT

Current value measured.

PM

Performance monitoring parameter name.

MIN

Minimum value measured.

MAX

Maximum value measured.

AVG

Average value.

Chromatic dispersion

Residual chromatic dispersion measured on line-side fiber link.

Differential group delay

Measured differential group delay on line-side fiber link in ps.

SNR

Signal to noise ratio of the line-side electrical data in dB.

Tx power

Optical power transmitted on optics module transmit port in dBm.

Rx total power

Total optical power received on optics module receive port in dBm.

Module temperature (Celsius)

Temperature of the optics module in degree Celsius.

Carrier frequency offset (MHz)

Measured carrier frequency offset on the optics line-side receiver.

PDL

Polarization dependent loss on the received line-side fiber link.

OSNR

Optical signal-to-noise ratio on the received line-side port

Sample Output

show interfaces transport pm

show interfaces transport pm optics (400G ZR optics)

show interfaces transport pm optics (400G ZR-M optics)

show interfaces transport (MX960 router with MPC3E and 100-Gigabit DWDM OTN MIC)

show interfaces transport pm (MX960 router with MPC3E and 100-Gigabit DWDM OTN MIC)

show interfaces transport pm

show interfaces transport (PTX3000 router with 5-port 100-Gigabit DWDM OTN PIC)

show interfaces transport pm optics (PTX3000 router with 5-port 100-Gigabit DWDM OTN PIC)

show interfaces transport pm otn (PTX3000 router with 5-port 100-Gigabit DWDM OTN PIC)

show interfaces transport pm optics (MX10003, MX10008, MX10016, and MX204 routers with QSFP-100GE-DWDM2 transceiver)

Release Information

Command introduced in Junos OS Release 14.2.