vrrp-inet6-group
Syntax
vrrp-inet6-group group-id {
(accept-data | no-accept-data);
advertisements-threshold number;
fast-interval milliseconds;
inet6-advertise-interval seconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix/prefix-length routing-instance instance-name priority-cost priority;
}
virtual-inet6-address [ addresses ];
virtual-link-local-address ipv6-address;
vrrp-inherit-from vrrp-group;
}
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number family inet6 address address], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet6 address address]
Description
Configure a Virtual Router Redundancy Protocol (VRRP) IPv6 group.
The group identifier that you enter must be different from any other group identifiers that you configured for logical units of this same physical interface.
Options
group-id—VRRP
group identifier. If you enable MAC source address filtering on the
interface, you must include the virtual MAC address in the list of
source MAC addresses that you specify in the source-address-filter statement. MAC addresses ranging from 00:00:5e:00:01:00 through 00:00:5e:00:01:ff are reserved for VRRP, as defined
in RFC 2338. The VRRP group number must be the decimal equivalent
of the last hexadecimal byte of the virtual MAC address.
Range: 0 through 255
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.