priority-hold-time
Syntax
priority-hold-time seconds;
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number family inet address address vrrp-group group-id track], [edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id track], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet address address vrrp-group group-id track], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id track]
Description
Configure a Virtual Router Redundancy Protocol (VRRP) router’s priority hold time to define the minimum length of time that must elapse between dynamic priority changes. If the dynamic priority changes because of a tracking event, the priority hold timer begins running. If another tracking event or manual configuration change occurs while the timer is running, the new dynamic priority update is postponed until the timer expires.
When the track feature is configured, and if VRRP should pre-empt due to the tracking interface or route transition, any configured pre-empt hold time will be ignored. VRRP primary will pre-empt according to the configuration of the priority-hold time.
Options
seconds—Minimum length of time that must elapse between dynamic priority changes.
Range: 0through 3600 seconds
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 8.1.