activeness-probe
Syntax
activeness-probe {
dest-ip {
ip-address;
routing-instance routing-instance;
src-ip src-ip;
minimal-interval milliseconds;
multiplier number;
}
}Hierarchy Level
[edit chassis high-availability services-redundancy-group]
Description
Specify the probe destination IP details for activeness determination.
Options
| activeness-probe |
dest-ip ip-address—Destination IP address to send the probe requests. |
routing-instance name—Routing instance used by the probe requests. |
src-ip ip-address—Source IP address to send the probe requests. |
minimal-interval milliseconds—(Optional) Time period between the probes sent to the destination IP address. You can configure 1000 milliseconds for minimal interval activeness probes. (supported in default gateway [switching] and hybrid deployments). |
multiplier number—(Optional) Time period, after which the backup node transitions to the active state, if the backup node fails to receive response to the activeness-probes from the peer node. (supported in default gateway [switching] and hybrid deployments).
|
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 22.3R1