fpc (Junos Fusion)
Syntax
fpc slot-id{
alias alias;
cascade-ports interface-name;
description description;
environment-monitoring-policy policy;
serial-numberserial-number;
system-id mac-address;
uplink-failure-detection {
candidate-uplink-policy policy;
}
local switching;
selective-vlan-switching{
routing-instance routing-instance;
}
}
Hierarchy Level
[edit chassis satellite-management]
Description
Configure an FPC identifier for a satellite device within a Junos Fusion, or modify the configuration of an existing satellite device in a Junos Fusion.
Options
| slot-id | Specifies the FPC identifier of the device and functions as the FPC identifier in the interface name when configuring satellite device interfaces. In a Junos Fusion Enterprise or Junos Fusion Provider Edge, the slot-id must have a value of 34 or greater. Note:
MPC10E and MPC11E are not supported in Junos Fusion, but can coexist with other MPC line cards in the MX router chassis that conncect to satellite devices. When using MPC10E/MPC11E line cards in an MX series router that is supporting Junos Fusion, you must use a value range of 160 - 252 as the FPC identifier for the satellite device interfaces. Junos Fusion does not support the hyper mode feature, so you
must also use the |
| local switching | Enables local-switching for all the ports on the satellite device. |
The remaining statements are explained separately.
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.2R3.
local-switching and selective-vlan-switching introduced in Junos OS Release 17.2R1 for Junos Fusion Provider
Edge.