Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    candidate-uplink-policy (Junos Fusion)

    Syntax

    candidate-uplink-policy policy;

    Hierarchy Level

    Release Information

    Statement introduced in Junos OS Release 14.2R3.

    Description

    Enables uplink failure detection with a candidate uplink policy in a Junos Fusion fabric.

    A candidate uplink policy allows you to specify how uplink failure detection is applied in a Junos Fusion fabric. A candidate uplink policy is configured using the [edit policy-options satellite-policy candidate-uplink-port-profile] hierarchy.

    A candidate uplink policy must be configured to enable uplink failure detection on a QFX5100 switch acting as a satellite device.

    Default

    Uplink failure detection is disabled.

    If uplink failure detection is enabled without a candidate uplink policy on an EX4300 switch acting as a satellite device, uplink failure detection is enabled for all uplink port interface links on the satellite device in the Junos Fusion fabric.

    If uplink failure detection is enabled without a candidate uplink policy on a QFX5100 switch acting as a satellite device, uplink failure detection is disabled for all uplink port interface links until a candidate uplink policy is configured.

    Options

    policy

    The name of the candidate uplink policy. The candidate uplink policy is configured using the [edit policy-options satellite-policy candidate-uplink-port-profile] hierarchy, and is named as part of the candidate uplink policy configuration procedure.

    Required Privilege Level

    admin—To view this statement in the configuration.

    admin-control—To add this statement to the configuration.

     

    Related Documentation

     

    Modified: 2016-08-12