Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show security flow session family

Syntax

Description

Display filtered summary of information about existing sessions, including types of sessions, active and failed sessions, and the maximum allowed number of sessions.

Options

  • inet—Display details summary of IPv4 sessions.

  • inet6—Display details summary of IPv6 sessions.

  • brief | extensive | summary–Display the specified level of output.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show security flow session family command. Output fields are listed in the approximate order in which they appear.

Table 1: show security flow session family Output Fields

Field Name

Field Description

Session ID

Number that identifies the session. Use this ID to get more information about the session.

Policy name

Policy that permitted the traffic.

Timeout

Idle timeout after which the session expires.

In

Incoming flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).

Out

Reverse flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).

Total sessions

Total number of sessions.

Status

Session status.

Flag

Internal flag depicting the state of the session, used for debugging purposes.

Policy name

Name and ID of the policy that the first packet of the session matched.

Source NAT pool

The name of the source pool where NAT is used.

Application

Name of the application.

Maximum timeout

Maximum session timeout.

Current timeout

Remaining time for the session unless traffic exists in the session.

Session State

Session state.

Start time

Time when the session was created, offset from the system start time.

Unicast-sessions

Number of unicast sessions.

Multicast-sessions

Number of multicast sessions.

Failed-sessions

Number of failed sessions.

Sessions-in-use

Number of sessions in use.

  • Valid sessions

  • Pending sessions

  • Invalidated sessions

  • Sessions in other states

Maximum-sessions

Number of maximum sessions.

Sample Output

show security flow session family inet

show security flow session family inet brief

show security flow session family inet extensive

show security flow session family inet summary

Release Information

Command introduced in Junos OS Release 10.2.