show security flow session destination-port
Syntax
show security flow session destination-portdestination-port-number [brief | extensive | summary]
Description
Display information about each session that uses the specified destination port.
Options
destination-port-number—Number of the destination port for which to display sessions information.Range: 1 through 65,535
brief | extensive | summary Display the specified level of output.
Required Privilege Level
view
Output Fields
Table 1 lists the output
fields for the show security flow session destination-port command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
|
Number that identifies the session. You can use this ID to get additional information about the session. |
|
Policy that permitted the traffic. |
|
Idle timeout after which the session expires. |
|
Incoming flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes). |
|
Reverse flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes). |
|
Total number of sessions. |
|
Session status. |
|
Internal flag depicting the state of the session, used for debugging purposes. |
|
Name and ID of the policy that the first packet of the session matched. |
|
The name of the source pool where NAT is used. |
|
Name of the application. |
|
Maximum session timeout. |
|
Remaining time for the session unless traffic exists in the session. |
|
Session state. |
|
Time when the session was created, offset from the system start time. |
|
Number of unicast sessions. |
|
Number of multicast sessions. |
|
Number of failed sessions. |
|
Number of sessions in use.
|
|
Number of maximum sessions. |
Sample Output
- show security flow session destination-port 23
- show security flow session destination-port 23 brief
- show security flow session destination-port 23 extensive
- show security flow session destination-port 23 summary
show security flow session destination-port 23
root> show security flow session destination-port 23 Flow Sessions on FPC10 PIC1: Total sessions: 0 Flow Sessions on FPC10 PIC2: Total sessions: 0 Flow Sessions on FPC10 PIC3: Session ID: 430000098, Policy name: default-policy-00/2, Timeout: 1778, Valid In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp, If: ge-7/1/0.0, Pkts: 109, Bytes: 5874, CP Session ID: 430000093 Out: 198.51.100.2/23 --> 198.51.100.10/15190;tcp, If: ge-7/1/1.0, Pkts: 64, Bytes: 4015, CP Session ID: 430000093 Total sessions: 1
show security flow session destination-port 23 brief
root> show security flow session destination-port 23 brief Flow Sessions on FPC10 PIC1: Total sessions: 0 Flow Sessions on FPC10 PIC2: Total sessions: 0 Flow Sessions on FPC10 PIC3: Session ID: 430000098, Policy name: default-policy-00/2, Timeout: 1778, Valid In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp, If: ge-7/1/0.0, Pkts: 109, Bytes: 5874, CP Session ID: 430000093 Out: 198.51.100.2/23 --> 198.51.100.10/15190;tcp, If: ge-7/1/1.0, Pkts: 64, Bytes: 4015, CP Session ID: 430000093 Total sessions: 1
show security flow session destination-port 23 extensive
root> show security flow session destination-port 23 extensive
Flow Sessions on FPC10 PIC1:
Total sessions: 0
Flow Sessions on FPC10 PIC2:
Total sessions: 0
Flow Sessions on FPC10 PIC3:
Session ID: 430000098, Status: Normal
Flags: 0x40/0x0/0x2008003
Policy name: default-policy-00/2
Source NAT pool: Null, Application: junos-telnet/10
Dynamic application: junos:UNKNOWN,
Encryption: Unknown
Application traffic control rule-set: INVALID, Rule: INVALID
Maximum timeout: 1800, Current timeout: 1630
Session State: Valid
Start time: 65490, Duration: 207
In: 198.51.100.10/15190 --> 198.51.100.2/23;tcp
Interface: ge-7/1/0.0,
Session token: 0x6, Flag: 0xc0001021
Route: 0xa0010, Gateway: 200.0.0.10, Tunnel: 0
Port sequence: 0, FIN sequence: 0,
FIN state: 0,
Pkts: 109, Bytes: 5874
CP Session ID: 430000093
Out: 198.51.100.2/23 --> 2198.51.100.10/15190;tcp,
Interface: ge-7/1/1.0,
Session token: 0x7, Flag: 0xc0001020
Route: 0x80010, Gateway: 60.0.0.2, Tunnel: 0
Port sequence: 0, FIN sequence: 0,
FIN state: 0,
Pkts: 64, Bytes: 4015
CP Session ID: 430000093
Total sessions: 1show security flow session destination-port 23 summary
root> show security flow session destination-port 23 summary Flow Sessions on FPC10 PIC1: Valid sessions: 0 Pending sessions: 0 Invalidated sessions: 0 Sessions in other states: 0 Total sessions: 0 Flow Sessions on FPC10 PIC2: Valid sessions: 0 Pending sessions: 0 Invalidated sessions: 0 Sessions in other states: 0 Total sessions: 0 Flow Sessions on FPC10 PIC3: Valid sessions: 1 Pending sessions: 0 Invalidated sessions: 0 Sessions in other states: 0 Total sessions: 1
Release Information
Command introduced in Junos OS Release 8.5; Filter and view options added in Junos OS Release 10.2.