Configuring RPM Receiver Servers
The RPM TCP and UDP probes are proprietary to Juniper Networks
and require a receiver to receive the probes. To configure a server
to receive the probes, include the probe-server statement
at the [edit services rpm] hierarchy level:
[edit services rpm] probe-server { tcp { destination-interface interface-name; port number; } udp { port number; } }
The port number specified for the UDP and TCP server can be 7 or from 49160 through 65535.
Note:
The destination-interface statement is not
supported on PTX Series Packet Transport routers.
When
you configure either probe-type udp-ping or probe-type
udp-ping-timestamp along with the one-way-hardware-timestamp command, the value for the destination-port can be only
7. A constraint check prevents you for configuring any other value
for the destination port in this case.