flow-export-rate
Syntax
flow-export-rate rate;
Hierarchy Level
[edit forwarding-options sampling instance instance-name family inet output inline-jflow]
Description
Specify the flow export rate of monitored packets
in kpps. If you have multiple line cards of different types running
on the same router, the flow-export-rate will be applied
to each card. However, the rate applied to the PFEs on the card will
vary in accordance with the number of PFEs that are on the card.
On
the MX Series, the actual flow export rate might be less than the
configured flow-export-rate. In addition, the maximum flow
export rate for an FPC or MPC module cannot exceed the configured flow-export-rate, regardless of how many PICs or MICs are on
the module.
Options
| rate | Flow export rate of monitored packets in kpps (from 1 through 400).
|
The maximum rate per PFE is 100 kpps for LU, 800 kpps
for XL/EA, so for an FPC with four LU PFEs (such as AS cards) you
can set a maximum flow-export-rate of 400. For an FPC with
two LU PFEs (such as the MPC2), the maximum flow-export-rate is 200. For an FPC with one LU PFE (such as the MPC5), the maximum
is 100. The Junos CLI accepts as valid any value within the range
of 1 to 3200, but when applied the value might trigger an error message
such as “The configured flow export rate is higher than supported
value/chip” in the Junos message log.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.2.