show services inband-flow-telemetry

Syntax

Description

Display Inband Flow Analyzer (IFA) 2.0 statistics.

Options

global

Display information about IFA global parameters configured in the IFA node. The IFA global parameters include the global device ID, metadata stack length, and hop limit.

profile

Display information about the IFA profile configured in the IFA node. The IFA profile configuration parameters include the profile name, sample rate, and so on.

stats

Display information about the number of IFA probe copies that traversed the IFA initiator, transit, and terminating nodes.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show services inband-flow-telemetry command.

Table 1: show services inband-flow-telemetry Output Fields
Field Name	Field Description	Level of Output
`Global Device ID`	Global device identifier, which is a unique identifier configured in the IFA node.	global
`Meta-data Stack Length`	Metadata stack length configured in the IFA node.	global
`Hop Limit`	Maximum number of hops in an IFA zone.	global
`Profile Name`	Name configured for the IFA profile. A profile name uniquely identifies each profile.	profile
`Sample rate`	Sample rate configured on the IFA node.	profile
`Source Address`	IFA terminating node's IPv4 source address.	profile
`Destination Address`	Collector's IPv4 destination address.	profile
`Destination Port`	Collector's destination port number.	profile
`IFA Init Packets`	Number of IFA probes initiated from the device.	stats
`IFA Transit Packets`	Number of IFA probes transited.	stats
`IFA Terminate Rx Packets`	Number of IFA probes received at the terminating node.	stats
`IFA Terminate Tx Packets`	Number of IFA copies transmitted to the collector application.	stats

Sample Output

show services inband-flow-telemetry global (QFX5120-48Y and QFX5120-32C)
show services inband-flow-telemetry profile (QFX5120-48Y and QFX5120-32C)
show services inband-flow-telemetry stats (QFX5120-48Y and QFX5120-32C)