show route rpm-tracking
Syntax
show route rpm-tracking <destination IP-address> <owner name> <test test-name>
Description
Display a brief summary of state of RPM-tracked routes along with the current state for a given test.
Options
| destination IP-address |
(Optional) Show RPM-tracked routes for a particular IPv4 or IPv6 destination prefix. |
| owner name |
The probe owner as configured at the
|
| test test-name |
The test name as configured at the
|
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show
route rpm-tracking command. You can
filter on routing table name, destination prefix,
RPM probe owner, and RPM test name. If no filter
is present all RPM-tracked routes are displayed.
Output fields are listed in the approximate order
in which they appear.
|
Field Name |
Field Description |
|---|---|
|
|
Displays the IPv4 or IPv6 address and optional prefix length of the configured target address. |
|
|
Specifies the IPv4 or IPv6 next-hop address of
the route to be injected during failover. When
there are multiple next-hop entries, a type
attribute is shown to indicate whether it
is
a single unicast next-hop,
|
|
|
Specifies a number that is associated with route preference; when multiple routes have the same preference, the route with lowest metric is made active in the routing table. |
|
|
Specifies a number
that is used to select routes to destinations in
external autonomous systems (ASs) or routing
domains. The route with lowest preference value is
selected by
the
routing protocol
process
as the active one.
This
column in the output appears only if you
configured the |
|
|
Specifies a number that is used to represent
and advertise a group of routes throughout the
routing
domain.
The route with the lowest tag value is selected by
the routing protocol process as the active one.
This column in the output appears only if you
configured the |
|
|
Name of the probe owner. |
|
|
Name of the test. |
|
|
Display the state of the route injection
action. Routes added to
the
routing
table
appear as |
Sample Output
- show route rpm-tracking
- show route rpm-tracking when preference and tag are configured
- show route rpm-tracking destination destination-prefix
- show route rpm-tracking destinationdestination-prefix when preference and tag are configured
- show route rpm-tracking destination destination-prefix owner name test test-name
show route rpm-tracking
user@host> show route rpm-tracking
Routing table: inet.0
Destination Next-Hop Metric Owner Test Name State
10.10.10.0/24 10.10.10.11 1 probe1 test1 Active
10.10.20.0/24 1
10.10.10.22 probe1 test2 Active
10.10.10.33 probe1 test3 Inactive
10.10.30.0/24 1
10.1.010.11 probe1 test1 Active
Routing table: inet6.0
2001:db8:10::/64 2001:db8:10::11 1 probe1 test1 Active
2001:db8:20::/64 1
2001:db8:10::22 probe1 test2 Active
2001:db8:10::33 probe1 test3 Inactive
10.10.20.0/24 1
2001:db8:10::11 probe1 test1 Active
show route rpm-tracking when preference and tag are configured
user@host> show route rpm-tracking
Routing table: inet.0
Destination Next-Hop Metric preference route-tag Owner Test Name State
10.10.10.0/0 - 5 50 12 - - -
10.10.10.11 - - - RPM-OWNER RPM-TEST Active
Destination Next-Hop Metric preference route-tag Owner Test Name State
10.10.10.0/16 - 2 18 15 - - -
10.10.10.22 - - - RPM-OWNER RPM-TEST1 Inactive
10.10.10.33 - - - RPM-OWNER RPM-TEST Active
Routing table: inet6.0
Destination Next-Hop Metric preference route-tag Owner Test Name State
2001:db8:10::/64 - 2 11 4 - - -
2001:db8:10::11 - - - RPM-OWNER RPM-TEST Active
show route rpm-tracking destination destination-prefix
user@host> show route rpm-tracking destination 10.39.0.0/16 Routing table: inet.0 Destination Next-Hop Metric Owner Test Name State 10.39.0.0/16 10.20.21.2 2 probe-delegate test7984 Active 10.39.1.0/16 10.20.21.3 2 probe-delegate test7985 Active 10.39.2.0/16 10.20.21.4 2 probe-delegate test7986 Active 10.39.3.0/16 10.20.21.5 2 probe-delegate test7987 Active 10.39.4.0/16 10.20.21.6 2 probe-delegate test7988 Active
show route rpm-tracking destinationdestination-prefix when preference and tag are configured
user@router> show route rpm-tracking destination 10.10.10.0/32
Routing table: inet.0
Destination Next-Hop Metric preference route-tag Owner Test Name State
10.10.10.0/32 - 1 14 20 - - -
10.10.10.2 - - - probe-1 test-1-1 Activeshow route rpm-tracking destination destination-prefix owner name test test-name
user@host> show route rpm-tracking destination 10.39.0.0/16 owner probe-delegate test test7998 Destination Next-Hop Metric Owner Test Name State 10.39.14.0/24 10.20.21.2 2 probe-delegate test7998 Active inet.0
show route rpm-tracking destination destination-prefix owner name test test-name when preference and tag are configured
user@router> show route rpm-tracking destination 10.10.10.0/32 owner probe-1 test test-1-1
Destination Next-Hop Metric preference route-tag Owner Test Name State
10.10.10.0/32 - 1 14 20 - - - inet.0
10.10.10.2 - - - probe-1 test-1-1 ActiveRelease Information
Command introduced in Junos OS Release 18.4 R1.
Output showing multiple next hops added in Junos OS Release 19.1R1.
Output showing
new
preference and route-tag
fields
added in Junos OS Release
20.4R1.