loss-priority (Classifiers and Rewrite Rules)
Syntax
loss-priority level {
code-points [aliases] [6–bit-patterns | 3–bit-patterns];
}
Hierarchy Level
[edit class-of-service classifiers (dscp | ieee-802.1 | inet-precedence | exp) classifier-name forwarding-class class-name], [edit class-of-service rewrite-rules (dscp | ieee-802.1 | inet-precedence | exp) rewrite-rule-name forwarding-class class-name]
Description
Specify packet loss priority value for a specific set of code-point aliases and bit patterns.
Options
level—Can be one of the following:
high—Packet has high loss priority.medium-high— Code points to classify to loss priority medium-high.low—Packet has low loss priority.medium-low— Code points to classify to loss priority medium-low.Note:The EX4300 hardware supports only three levels of loss priority —
high,medium-high, andlow. You can configure a loss priority ofmedium-lowon the EX4300, but the hardware will convert it tomedium-high.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.0.
Statement expanded to apply to EXP classifiers in Junos OS Release 10.1 for EX Series switches.