tunnel-loopback
Syntax
tunnel-loopback;
Hierarchy Level
[edit dynamic-profiles name interfaces name unit name family inet], [edit dynamic-profiles name logical-systems name interfaces name unit name family inet], [edit interfaces name unit name family inet]
Description
You use the tunnel-loopback statement to enable the loopback of tunnel
traffic received over an integrated routing and bridging (IRB) interface. Configure this
statement under the IPV4 family inet hierarchy of an IRB interface.
This is required to loopback tunnel traffic and terminate tunnels in the loopback path
for both VXLAN and MPLS over UDP scenarios.
Note: For EVPN-VXLAN deployments you must also configure the
tunnel-termination statement at the [edit
forwarding-options] hierarchy level which enables the termination of tunnels
on all interfaces at the global
level.Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Evolved Release 23.4R1