tag-protocol-id (TPID to Rewrite)
Syntax
tag-protocol-id tpid;
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number input-vlan-map], [edit interfaces interface-name unit logical-unit-number output-vlan-map], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]
Description
For Gigabit Ethernet IQ and 10-Gigabit Ethernet
IQ2 and IQ2-E interfaces only, configure the outer TPID value. All
TPIDs you include in input and output VLAN maps must be among those
you specify at the [edit interfaces interface-name gigether-options ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.
For 10-Gigabit Ethernet LAN/WAN PIC interfaces on T Series routers
the default TPID value (0x8100) is supported.
Default
If the tag-protocol-id statement is not
configured, the TPID value is 0x8100.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.