tag-protocol-id TPID(TPIDs Expected to Be Sent or Received)
Syntax
tag-protocol-id [tpids];
Hierarchy Level
[edit interfaces interface-name gigether-options ethernet-switch-profile], [edit interfaces interface-name aggregated-ether-options ethernet-switch-profile], [edit interfaces interface-name aggregated-ether-options ethernet-switch-profile], [edit interfaces interface-name ether-options ethernet-switch-profile]
Description
For Gigabit Ethernet IQ and 10-Gigabit Ethernet
IQ2 and IQ2-E interfaces, aggregated Ethernet with Gigabit Ethernet
IQ interfaces, and Gigabit Ethernet PICs with SFPs (except the 10-port
Gigabit Ethernet PIC, and the built-in Gigabit Ethernet port on the
M7i router), define the TPIDs expected to be sent or received on a
particular VLAN. For each Gigabit Ethernet port, you can configure
up to eight TPIDs using the tag-protocol-id statement;
but only the first four TPIDs are supported on IQ2 and IQ2-E interfaces.
For 10-Gigabit Ethernet LAN/WAN PIC interfaces on T Series routers
only the default TPID value (0x8100) is supported.
For Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet,
and aggregated Ethernet interfaces on EX Series switches, define the
TPIDs expected to be sent or received on a particular VLAN. The default
TPID value is 0x8100. Other supported values are 0x88a8, 0x9100, and 0x9200.
Starting in Junos OS Release 22.4R1, the QFX5100, QFX5110, QFX5120, QFX5200, and QFX5210 switches support up to four TPID configurations per VLAN. The system supports the following values for the TPID configuration: 0x8100, 0x9200, 0x88a8, and 0x9100. A TPID needs to be defined in the command-line interface for aggregated ethernet interfaces and the ether interfaces for the device, before it can be sent or received.
Routing Engine can handle only the default TPID 0x8100. The
traffic destined to the Routing Engine is discarded if the TPID is not
0x8100.
Options
tpids—TPIDs
to be accepted on the VLAN. Specify TPIDs in hexadecimal.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Metro Routers.