static-interface
Syntax
static-interface interface-name;
Hierarchy Level
[edit protocols pppoe service-name-tables table-name service service-name agent-specifier aci circuit-id-string ari remote-id-string]
Description
Reserve the specified static PPPoE interface for
use only by the PPPoE client with matching agent circuit identifier
(ACI) and agent remote identifier (ARI) information. You can specify
only one static interface per ACI/ARI pair configured for a named
service entry, empty service entry, or any service
entry in the PPPoE service name table.
The static interface associated with an ACI/ARI pair takes precedence over the general pool of static interfaces associated with the PPPoE underlying interface.
If you include the static-interface statement in
the configuration, you cannot also include either the dynamic-profile statement or the routing-instance statement. The dynamic-profile, routing-instance, and static-interface statements are mutually exclusive for ACI/ARI pair configurations.
Options
interface-name—Name of the static PPPoE interface reserved for use by the
PPPoE client with matching ACI/ARI information. Specify the interface
in the format pp0.logical, where logical is a logical unit number from
0 through 16385 for static interfaces.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.2.