report-ingress-shaping-rate (Dynamic CoS Interfaces)
Syntax
report-ingress-shaping-rate bps;
Hierarchy Level
[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number]
Description
Report the ingress shaping rate in bits per second
that is used as the receive speed (Rx) for the LAC to send to the
LNS. The ingress shaping rate is used when the method for deriving
the connect speed is configured as service-profile with
the tx-connect-speed statement at the [edit services
l2tp] hierarchy level.
This statement is supported only when the effective
shaping-rate statement is included at the [edit chassis] hierarchy level. If it is not, the subscriber login fails and a
system log message is generated. There is no commit check failure
because a commit check cannot be performed at run time.
Options
| bps | Ingress shaping rate in bits per second. |
Range: 1000 through 6,400,000,000,000 (6.4Tbps)
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.2.