Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show pfe next-hop

Syntax

Syntax (TX Matrix and TX Matrix Plus Routers)

Description

Display Packet Forwarding Engine next-hop information.

Options

none

Display all Packet Forwarding Engine next-hop information.
fpc slot

(TX Matrix and TX Matrix Plus routers only) (Optional) Show the next hops for a Flexible PIC Concentrator (FPC) slot.

  • On a TX Matrix router, if you specify the number of a T640 router by using the lccnumber option (the recommended method), replace slot with a value from 0 through 7. Otherwise, replace slot with a value from 0 through 31.

  • On a TX Matrix Plus router, if you specify the number of a T1600 router by using the lccnumber option (the recommended method), replace slot with a value from 0 through 7. Otherwise, replace slot with a value from 0 through 31.

  • On a TX Matrix Plus router in the TXP-T1600-3D, TXP-T4000-3D, or TXP-Mixed-LCC-3D configuration, if you specify the number of a T1600 or T4000 router by using the lccnumber option (the recommended method), replace slot with a value from 0 through 7. Otherwise, replace slot with a value from 0 through 63.

For example, the following commands have the same result:
interface interface-name

(Optional) Display the Packet Forwarding Engine next-hop interface.
lcc number

(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display Packet Forwarding Engine next-hop interface for a specific T640 router (or line-card chassis) that is connected to a TX Matrix router. On a TX Matrix Plus router, display Packet Forwarding Engine next-hop interface for the router (or line-card chassis) that is connected to a TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

Required Privilege Level

admin

Output Fields

Table 1 lists the output fields for the show pfe next hop command. Output fields are listed in the approximate order in which they appear.

Table 1: show pfe next-hop Output Fields

Field Name

Field Description

ID

The next-hop ID for the entry.

Type

The next-hop type for the entry.

Interface

The interface to which the next-hop entry is assigned.

Protocol

The protocol type for the next-hop entry.

Encap

Encapsulation type for the next-hop entry.

Next Hop Addr

Next-hop address for the next-hop entry.

MTU

MTU value for the nexthop entry.

Sample Output

show pfe next-hop

show pfe next-hop fpc (TX Matrix Router)

show pfe next-hop fpc (TX Matrix Plus Router)

Release Information

Command introduced before Junos OS Release 7.4.

Related Documentation