Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show igmp-snooping statistics



Display IGMP snooping statistics information.


To display similar information on routing devices or switches that support the Enhanced Layer 2 Software (ELS) configuration style, use the equivalent command show igmp snooping statistics.

Required Privilege Level


Output Fields

Table 1 lists the output fields for the show igmp-snooping statistics command. Output fields are listed in the approximate order in which they appear.

Table 1: show igmp-snooping statistics Output Fields

Field Name

Field Description

Bad length

IGMP packet has illegal or bad length.

Bad checksum

IGMP or IP checksum is incorrect.

Invalid interface

Packet was received through an invalid interface.

Not local

Number of packets received from senders that are not local, or 0 if not used (on some devices).

Receive unknown

Unknown IGMP type.

Timed out

Number of timeouts for all multicast groups, or 0 if not used (on some devices).


Type of IGMP message (Queries, Reports, Leaves, or Other).


Number of IGMP packets received.


Number of IGMP packets transmitted.

Recv Errors

Number of general receive errors, for packets received that did not conform to IGMP version 1 (IGMPv1), IGMPv2, or IGMPv3 standards.

Sample Output

show igmp-snooping statistics

Release Information

Command introduced in Junos OS Release 9.1.