show chassis in-service-upgrade

Syntax

Description

Display the status of Flexible PIC Concentrators (FPCs) and their corresponding PICs after the most recent unified in-service software upgrade (ISSU). This command must be issued on the primary Routing Engine.

Note:

Only Intelligent Queuing (IQ) PICs are displayed by this command output. Unified ISSU status for other PIC types is controlled internally by the FPC.

Options

This command has no options.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show chassis in-service-upgrade command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis in-service-upgrade Output Fields
Field Name	Field Description
`Item`	Flexible PIC Concentrator (FPC) slot number.
`Status`	FPC and corresponding PIC state. State can be either of the follwing: `Online`—FPC is online and running. `Offline`—FPC is powered down.
`Reason`	Reason for the state (if offline).

Sample Output

show chassis in-service-upgrade
show chassis in-service-upgrade (MX2010 Router)
show chassis in-service-upgrade (MX2020 Router)
show chassis in-service-upgrade (MX2008 Router)
show chassis in-service-upgrade (TX Matrix Plus Router)
show chassis in-service-upgrade (QFX5100 Switch)
show chassis in-service-upgrade (EX9253 Switch)