request chassis primary-ha-control-port-transition
Syntax
request chassis primary-ha-control-port-transition <fpc FPC slot number | from-fpc-to-scb | from-scb-to-fpc>
Description
With this command, you can disable the FPC slot number HA port 0 on local node, and then enable the SCB0 HA control port on local node or disable the SCB0 HA control port on local node, and then enable the FPC slot number HA port 0 on local node.
This command is used during single control link online transition and it can be carried out in cluster mode on SRX5K series devices.
Options
| fpc |
Specify the FPC slot number. Range: 0 through 23 |
| from-fpc-to-scb |
Transition from FPC to SCB. |
| from-scb-to-fpc |
Transition from SCB to FPC. |
Required Privilege Level
maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request chassis primary-ha-control-port-transition
user@host> request chassis primary-ha-control-port-transition from-fpc-to-scb fpc 0
fpc 0 HA control port 0 disabled & scb 0 HA control port enabled
user@host> request chassis primary-ha-control-port-transition from-scb-to-fpc fpc 0
scb 0 HA control port disabled & fpc 0 HA control port 0 enabled
Release Information
Command introduced in Junos OS Release 21.4R1.