idle-after-switch-over
Syntax
idle-after-switch-over (forever | seconds);
Hierarchy Level
[edit logical-systems logical-system-name protocols bgp], [edit logical-systems logical-system-name protocols bgp group group-name], [edit logical-systems logical-system-name protocols bgp group group-name neighbor address], [edit protocols bgp], [edit protocols bgp group group-name], [edit protocols bgp group group-name neighbor address]
Description
Configure the routing device so that it does not automatically reestablish BGP peer sessions after a nonstop active routing (NSR) switchover. This feature is particularly useful if you are using dynamic routing policies because the dynamic database is not synchronized with the backup Routing Engine when NSR is enabled.
Options
forever—Do not reestablish a
BGP peer session after an non-stop routing switchover until the clear bgp neighbor command is issued.
seconds—Do not reestablish a BGP peer session after an non-stop routing switchover until after the specified period.
Range: 1 through 4,294,967,295 (232 – 1)
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.5.