Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

egress-te-adj-segment

Syntax

Hierarchy Level

Description

Specify a BGP peer adjacency segment for only multihop EBGP peers. You can specify a segment set so that the packet is sent to any member in the set, which is the equal-cost multipath next hop. You can include an adjacent segment or a node segment to the same peer segment set. You must configure egress-te-node-segment before configuring the BGP peer adjacency segment.

name

Specify a name for the peer adjacency segment.

Options

egress-te-backup-ip-forward instance-name

Specify a routing-instance name to use the IP forward backup path for egress TE.

egress-te-backup-segment label label-value

Specify the backup label value for a segment for MPLS fast reroute. The label must already be associated with a segment and must be different from the protected segment specified with the egress-te-node-segment or egress-te-adj-segment statement.

egress-te-set set-name weight weight

Specify the name of the segment set configured with theegress-te-set-segment statement. You can include both node segments and adjacency segments in the same segment set. The egress router advertises the peer node SID label for all its peers including the EBGP peers and the controller advertises these SID labels to the ingress router.

  • Range: weight: 1 through 255

label label-value

Specify a label from the static label range for the peer adjacency segment.

next-hop next-hop-address

Specify a directly connected next-hop address for the peer adjacency segment.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 18.4R1.

egress-te-backup-ip-forward option introduced in Release 20.1R1.