Add L3VPN Service Post Update Placements Site Network Access Parameters

You can configure placement parameters for the L3VPN service when you are creating or modifying the service instance. Use Update placements button on the General page and Customer Site Settings page to automatically assign possible placement options for the service instance.

You must create an L3VPN service instance and add general, site, and site network access details before you update the placements parameters about the service. See Add an L3VPN Service Instance and Add L3VPN Site and Site Network Access Details.

To configure placement parameters:

1. Click the Update Placements button on top of the Customer Site Settings page and click Yes when prompted to confirm.

   The service instance is saved to the Routing Director database. The saved instance is listed in the Service Instances table on the Service Instances page.

   Service orchestration automatically assigns possible placement options such as PE devices and interfaces, CE devices, and VLANs for the service instance. After placement options are assigned, a confirmation message appears indicating that the placement was successfully updated.

2. (Optional) Click Back on the Customer Site Settings page to configure placement parameters in the fields on the General page if you have not already configured them in 4 of the Add an L3VPN Service Instance wizard.

   Alternatively, if you have already configured the placement parameters, verify the parameters and edit them if required.

   Click Next to go back to the Customer Site Settings Page.

3. To add placement parameters on the Customer Site Settings page, select the site network access for which you want to configure placement parameters, and click the edit icon.

   The Edit Connection page appears.

   1. Expand Access Interface and configure the access interface parameters by referring to the following table:

      Table 1: Access Interface Parameters (L3VPN)

      Field	Description
      CE Node	Select the CE device that you want to connect to the PE device.
      PE Node	Select the PE device that you want to allocate for the connection.
      PE Interface	Select the PE interface that you want to assign to the connection.
      Speed	Displays the speed (in Mbps) of the access interface.

   2. Expand the following section to configure the placement parameters.

      • If you selected regular as the access connection type on the Add Connection page, configure the Placement parameters by referring to the following table:

        Table 2: Placement Parameters (L3VPN)

        Field	Description
        CE Node	Click the CE Node drop-down and select the CE device that you want to connect to the PE device for the VPN service.
        PE Node	Click the PE Node drop-down and select the PE device that you want to allocate for the VPN service.
        PE Interface	Click the PE Interface drop-down and select the PE interface name that you want to assign for the VPN service.

      • If you selected irb as the connection type on the Add Connection page, configure the IRB Placement parameters by referring to the following table:

        Table 3: IRB Placement Parameters (L3VPN)

        Field	Description
        Instance	Select the service instance that created the IRB interface for L3VPN service.
        NE Id	Select the network element ID that identifies the device to which the IRB interface belongs.
        VLAN	Select the VLAN ID for the PE device. Note: This field appears only when you select vlan-aware as the EVPN service type for an E-LAN EVPN CSM service instance.
        Name	Displays the name of the interface assigned to the IRB instance.

        Note:

        Configuring IRB interfaces for an L3VPN service is qualified only for specific scenarios.

      • If you selected stitching-endpoint as the access connection type on the Add Connection page, edit the Placement Service Stitching Creator parameters by referring to the following table:

        Table 4: Placement Service Stitching Creator Interface Parameters (L3VPN)

        Field	Description
        PE	Select the PE device where the logical tunnel interface is created.
        Logical Tunnel	Select the logical tunnel interface (for example, lt-0/0/0) created for service stitching.
        Left Range	Select the range of logical tunnel subinterfaces (for example, range-2) from which the subinterface for initiating the service stitch is allocated.
        Left Unit	Enter the subinterface on the left-side of the logical tunnel interface.
        Right Range	Select the range of logical tunnel subinterfaces (for example, range-1) from which the subinterface for terminating the service stitch is allocated.
        Right Unit	Enter the subinterface on the right-side of the logical tunnel interface.

      • If you selected service as the access connection type on the Add Connection page, edit the Placement Service Stitching Connector parameters by referring to the following table:

        Table 5: Placement Service Stitching Connector Interface for Peering Service Parameters (L3VPN)

        Field	Description
        Service Instance	Select the service instance that initiates the service stitch or the service instance on the left-side of the service stitch.
        PE	Select the provider edge device on the terminating side or the right-side of the stitch.
        Network Access	Select the network access reference on the initiating side or the left-side of the service stitch.
        Logical Tunnel Interface Left	The logical tunnel interface on the left side of the stitch.

4. Do any of the following:

   • Click Cancel to exit the Edit Connection page without saving the changes you made.

   • Click Reset Placements to remove the configured placement parameters.

   • Click OK to save the placement parameters you edited.

     You are returned to the Customer Site Settings page of the Add L3VPN wizard and the connection you edited is listed in the Site Network Access table.

5. View summary of the L3VPN service and then save and provision the service. See View Summary and Provision an L3VPN Service.