Add an Optimization Profile

Create optimization profiles to define when the LSP must be recomputed. For more information, see Network Optimization Overview and About the Optimization Profiles.

To create an optimization profile:

1. Navigate to Network Optimization > Network > Network Optimization Intent.

   The Topology page is displayed with the topology map at the center and the network information table at the bottom of the page.

2. Navigate to the Optimization Profiles tab

   .

3. Click the plus icon (+).

   The Create Optimization Page page appears.

4. Complete the configuration according to the guidelines in Table 1.

   Note: Fields marked with an asterisk (*) are mandatory.

5. Do one of the following:

   • Click Save Draft, to save the optimization profile. Save the optimization profile if you intend to modify it later.

   • Click Publish, to publish the optimization profile. Publish the optimization profile if you want to attach this optimization profile to a path intent.

     Note: You can attach the optimization profile to a path intent only if you publish the optimization profile. If an optimization profile is attached to a path intent, then the optimization profile cannot be edited or deleted.

A message indicating that the optimization profile is created appears. You are returned to the Optimization Profiles tab where you can view the newly added optimization profile.