Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

HP Networking ProVision

JSA Risk Manager supports the HP Networking ProVision adapter.

The following features are available with the HP Networking ProVision adapter:

Neighbor data support
SNMP discovery
RIP dynamic routing
Telnet and SSH connection protocols

The following table describes the integration requirements for the HP Networking ProVision adapter.

Table 1: Integration Requirements for the HP Networking ProVision Adapter
Integration requirement	Description
Versions	HP Networking ProVision Switches K/KA.15.X Note: HP switches that run a Comware operating system are not supported by this adapter.
SNMP discovery	Matches version numbers with the format `HP(.)Switch(.)(revision [A-Z]{1,2}\.(\d+)\.(\d+)`) in sysDescr.
Required credential parameters To add credentials in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.	Username Password Enable Password
Supported connection protocols To add protocols in JSA, log in as an administrator and use Configuration Source Management on the Admin tab.	SSH
Backup operation commands that are issued by the adapter to the device	`dmesgshow system power-supply` `getmib` `show access-list vlan <vlan id>` `show access-list` `show access-list <name or number>` `show access-list ports <port number>` `show config` `show filter` `show filter <id>` `show running-config` `show interfaces brief` `show interfaces <interface id>` For each interface. `show jumbos` `show trunks` `show lacp` `show module` `show snmp-server` `show spanning-tree` `show spanning-tree config` `show spanning-tree instance <id or list> (for each spanning-tree that is configured on the device)` `show spanning-tree mst-config` `show system information` `show version` `show vlans` `show vlans <id>` (for each vlan) `show vrrp` `walkmib`
`show ip` backup operation commands that are issued by the adapter to the device	`show ip` `show ip route` `show ip odpf` `show ip odpf redistribute` `show ip rip` `show ip rip redistribute`
Telemetry and neighbor data commands	`getmib` `show arp` `show cdp neighbors` `show cdp neighbors detail <port number>` `show interfaces brief` `show interface` `show ip route` `show lldp info remote-device` `show lldp info remote-device <port number>` `show mac-address or show mac address` `show system information` `show vlans` `show vlans custom id state ipaddr ipmask` `walkmib`