Amazon AWS S3 REST API Log Source Parameters for Amazon AWS Application Load Balancer Access Logs
If JSA does not automatically detect the log source, add an Amazon AWS Application Load Balancer Access Logs log source on the JSA Console by using the Amazon AWS S3 REST API protocol.
When you use the Amazon AWS S3 REST API protocol, there are specific parameters that you must configure.
The following table describes the parameters that require specific values to collect Amazon AWS S3 REST API events from Amazon AWS Application Load Balancer Access Logs:
Parameter |
Value |
---|---|
Log Source type |
Amazon AWS Application Load Balancer Access Logs |
Protocol Configuration |
Amazon AWS S3 REST API |
Log Source Identifier |
Type a unique name for the log source. The Log Source Identifier can be any valid value and does not need to reference a specific server. The Log Source Identifier can be the same value as the Log Source Name. If you have more than one Amazon AWS Application Load Balancer Access Logs log source that is configured, you might want to identify the first log source as awsalb1, the second log source as awsalb2, and the third log source as awsalb3. |
Event Format |
LINEBYLINE |
For a complete list of Amazon AWS S3 REST API protocol parameters and their values, see Amazon S3 REST API protocol configuration options.