Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Front-and-Rear-Mounting the JSA7500 in a 4-Post Sliding Rail Rack

This option is used for the chassis that can easily pulled out from the rack when mounted on the rack-mount system. The JSA7500 appliance is mounted using this option because of the fan door available on the top of the appliance.


The front-to-back rail spacing must be at least 48.3 cm (19-in.) from the outside face of the front rail to the outside face of the back rail.

To mount JSA7500 using this option:

  1. Insert four rack-mount screws on each side of the appliance to secure the mounting brackets to the sides of the chassis as shown in Figure 1.
    Figure 1: Securing Mounting BracketsSecuring Mounting Brackets
  2. On the slide assembly, press the button on each slide and pull the glide completely out of the slide as shown in Figure 2.
    Figure 2: Slide AssemblySlide Assembly






  3. Attach the glide to the sides of the appliance as shown in Figure 1.
  4. Attach the slide sets to the desired position of front and rear of the rack cabinet as shown in Figure 3.
    Figure 3: Attaching the Slide SetsAttaching the Slide Sets
  5. Push the slide buttons and slide the appliance all the way into the rack enclosure as shown in Figure 4.
    Figure 4: Sliding the Appliance into the RackSliding the Appliance into the Rack
  6. Secure the front-mount rail brackets to your equipment rack with two rack mount screws each as shown in Figure 5.
    Figure 5: Securing the Front-Mount Rail BracketsSecuring the Front-Mount Rail Brackets