Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

JSA5800 Chassis

JSA5800 Appliance Front Panel Description

Figure 1 shows the front panel components of the JSA5800 appliance.

Figure 1: JSA5800 Front PanelJSA5800 Front Panel

Table 1 lists the front panel components of the JSA5800 appliance.

Table 1: JSA5800 Front Panel Components

Callout

Component

Description

1

Front Bezel

Protects the appliance.

2

Lock

Locks the appliance.

3

Power button

Powers on or powers off the appliance.

4

Hard drive

Eight 900 GB hard disk drives (Drive0 - Drive7).

5

Hard drive

Empty slots (Drive8 - Drive15).

6

RESET button

Reboots the appliance.

7

Chassis LEDs

Provides the colors and states, and the status they indicate.

Figure 2 shows the front panel LEDs of the JSA5800 appliance.

Figure 2: JSA5800 Front Panel LEDsJSA5800 Front Panel LEDs

Table 2 lists the front panel LEDs of the JSA5800 appliance.

Table 2: JSA5800 Front Panel LEDs

Callout

LEDs

Description

1

Power

Solid green—Indicates that the appliance is receiving power.

2

LAN2

When blinking, it indicates DataShare interface activity.

3

Alert/Power fail

Red—Indicates a power supply failure.

Amber—Indicates that the appliance is operating normally. The LED might glow amber if a rescue configuration is not set. This is not a panic condition.

4

Hard drive

Unused.

5

LAN1

When blinking, it indicates Management interface activity.

6

Information

  • Red (blinking)—Indicates a fan failure.

  • Solid red—Indicates an overheat condition, which might be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm.

    You can perform the following checks:

    • Check the routing of the cables and ensure that all fans are present and operating normally.

    • Ensure that the chassis covers are installed.

    • Verify that the heatsinks are installed properly.

  • Red (slowly blinking)—Indicates a power failure.

  • Solid blue —Indicates UID function is activated.

JSA5800 Appliance Back Panel Description

Figure 3 shows the back panel components of the JSA5800 appliance.

Figure 3: JSA5800 Back PanelJSA5800 Back Panel

Table 3 lists the back panel components of the JSA5800 appliance.

Table 3: JSA5800 Back Panel Components

Callout

Components

Description

1

Power supply

Provides power to all components.

2

Dedicated IPMI LAN port

1 RJ-45 dedicated IPMI LAN port.

3

GB ports

4 RJ-45 Gigabit Ethernet LAN ports.

Top left: eth4; top right: eth5

Bottom left: eth2; bottom right: eth3

Note:

You can choose any GB ports as the management port.

4

10 GB+SFP ports

2 SFP+ 10GbE LAN ports. The top port is eth0 and the bottom port is eth1.

5

VGA port

1 VGA port.

Note:

This port is not supported.

6

USB ports

4 USB ports.

Top left: port 1; top right: port 3

Bottom left: port 0; bottom right: port 2

7

COM port

1 DB-9 COM port.

Figure 4 shows the back panel Ethernet port LEDs of the JSA5800 appliance.

Figure 4: JSA5800 Ethernet Port LEDsJSA5800 Ethernet Port LEDs

Table 4 lists the JSA5800 Ethernet port LEDs.

Table 4: JSA5800 Ethernet Port LEDs

Callout

LEDs

Description

1

Link

  • Off—Indicates no connection or the speed of the connection is 10 Mbps.

  • Green—Indicates that the speed of the connection is 100 Mbps.

  • Amber—Indicates that the speed of the connection is 1 Gbps.

2

Activity

Indicates link activity.