Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Restoring CTPView Software Data by Manually Synchronizing the CTPView Server (CTPView)

This topic describes how to use CTPView server synchronization to restore the CTPView software configuration settings and data.

To restore your saved information by synchronizing the CTPView server with another server:

  1. Log in to the CTPView GUI on the server for which you are restoring the data.
  2. In the side pane, select Server > Administration to display the Administrative Functions pane.
  3. Click Server Synchronization.
  4. Verify that the server is either not listed or its Server Type is set to Not Selected.
  5. Log in to the CTPView GUI on the server from which you are restoring the data.
  6. In the side pane, select Server > Administration to display the Administrative Functions pane.
  7. Click Server Synchronization.
  8. Ensure that the Server Type is set to Primary Server for this server, Secondary Server for the server being updated, and Not Selected for all other CTPView servers listed.
  9. Click Manually Synchronize Network.

    The Synchronize Secondary Servers window opens.

  10. Click Select All Hosts, and then click Synchronize Servers.
  11. When the synchronization is completed, restore the Server Type for all CTPView servers to the values that you normally use for your network.

Using CTPView server synchronization, you can restore the following CTPView configuration settings and data:

  • AutoSwitch configuration for CTP devices

  • Configuration of CTP devices on CTPview (addition of CTP devices in groups)

  • Configuration of remote bundles (CTP, SAToP, and CESoPSN)

  • Network monitoring configuration on CTPView

  • NTP configuration for CTP devices

  • RADIUS configuration for CTP devices

  • Syslog configuration for CTP devices

  • SNMP and SNMP trap configurations for CTP devices

Related Documentation