About the Breakout Profiles Page
You can use the Breakout Profiles page to view existing breakout profiles, add local, backhaul, and cloud breakout profiles, edit breakout profiles, and delete breakout profiles. You can also add settings for cloud breakout, edit cloud breakout settings, assign the settings to one or more sites, detach the settings from one or more sites, and delete the settings.
The breakout profiles are displayed on the Breakout Profiles tab and the cloud breakout settings are displayed on the Cloud Breakout Settings tab.
Sites with SD-WAN Essentials service do not support cloud breakout profiles.
Tasks You Can Perform
You can perform the following tasks from this page:
View existing breakout profiles—See Table 1 for a description of the fields.
View the details of a breakout profile—On the Breakout Profiles tab, select a breakout profile and from the More menu, select Detail View. The Detail for Breakout-Profile-Name pane appears on the right-hand side of the page. See Table 1 for a description of the fields on this pane.
View existing cloud breakout settings—(Not applicable to sites with SD-WAN Essentials service.) See Table 2 for a description of the fields.
View the details of cloud breakout settings—(Not applicable to sites with SD-WAN Essentials service.) On the Cloud Breakout Settings tab, select a cloud breakout setting and from the More menu, select Detail View. The Detail for Cloud-Breakout-Setting-Name pane appears on the right-hand side of the page. See Table 2 for a description of the fields on this pane.
Add a breakout profile—See Adding Breakout Profiles.
Edit a breakout profile—See Editing Breakout Profiles and Cloud Breakout Settings.
Delete a breakout profile—See Deleting Breakout Profiles and Cloud Breakout Settings.
Add cloud breakout settings—See Adding Cloud Breakout Settings.
Edit cloud breakout settings—See Editing Breakout Profiles and Cloud Breakout Settings.
Delete cloud breakout settings—See Deleting Breakout Profiles and Cloud Breakout Settings.
Assign cloud breakout settings to one or more sites—See Assigning Cloud Breakout Settings to Sites.
Detach cloud breakout settings from one or more sites—See Detaching Cloud Breakout Settings from Sites.
Breakout Profiles Field Descriptions
Field |
Description |
Displayed On |
|---|---|---|
Name |
Name of the breakout profile. |
Breakout Profiles page (Breakout Profiles tab) Detail for Breakout-Profile-Name pane |
Type |
Indicates whether the breakout profile is for local breakout (underlay) or backhaul (central breakout) or cloud breakout. |
Breakout Profiles page (Breakout Profiles tab) Detail for Breakout-Profile-Name pane |
Description |
Description of the breakout profile. |
Breakout Profiles page (Breakout Profiles tab) |
Path Preference |
Indicates the preferred path to be used for breakout traffic:
|
Breakout Profiles page (Breakout Profiles tab) |
Added by |
Username of the user who added the breakout profile. |
Breakout Profiles page (Breakout Profiles tab) |
FqName |
Internal name of the breakout profile. |
Breakout Profiles page (Breakout Profiles tab) |
Rate Limiting |
Indicates whether rate limiting is enabled or disabled for the breakout profile. |
Detail for Breakout-Profile-Name pane |
Downstream Rate |
Indicates the maximum downstream rate (in Kbps) for all cacheable applications associated with the breakout profile. |
Detail for Breakout-Profile-Name pane |
Downstream Burst Size |
Indicates the maximum downstream burst size (in bytes) for all cacheable applications associated with the breakout profile. |
Detail for Breakout-Profile-Name pane |
Upstream Rate |
Indicates the maximum upstream rate (in Kbps) for all cacheable applications associated with the breakout profile. |
Detail for Breakout-Profile-Name pane |
Upstream Burst Size |
Indicates the maximum upstream burst size (in bytes) for all cacheable applications associated with the breakout profile. |
Detail for Breakout-Profile-Name pane |
Loss Priority |
Indicates the loss priority associated with the breakout profile. The loss priority determines which packets are dropped or retained when network congestion occurs. |
Detail for Breakout-Profile-Name pane |
Cloud Breakout Settings Field Descriptions
Not applicable to sites with SD-WAN Essentials service.
Field |
Description |
Displayed On |
|---|---|---|
| General | ||
Name or Profile-Name |
Name of the cloud breakout setting. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Tunnel Type |
Overlay tunnel type (IPSEC or GRE) used to break out traffic to the cloud breakout node. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Primary Gateway |
IPv4 address of the primary cloud breakout node. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Primary Link Type |
Preferred type of WAN link to be used for breaking out the traffic to the primary cloud breakout node. If a WAN link type that matches the preferred path is enabled for breakout, then that WAN link type is used for breakout traffic. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Secondary Gateway |
IPv4 address of the secondary cloud breakout node. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Secondary Link Type |
Preferred type of WAN link to be used for breaking out the traffic to the secondary cloud breakout node. |
Breakout Profiles page (Cloud Breakout Settings tab) Detail for Cloud-Breakout-Setting-Name pane |
Sites |
If the cloud breakout settings are assigned to one or more sites, the names of the sites are displayed; if not, this field is blank. |
Breakout Profiles page (Cloud Breakout Settings tab) |
Provider |
Name of the cloud service provider. |
Detail for Cloud-Breakout-Setting-Name pane |
| IPSEC Configuration Parameters | ||
Domain Name |
The domain name to generate the fully qualified domain name (FQDN) that is used by the cloud security providers to identify the IPsec tunnel end points. The domain name is populated based on the customer domain name that you provided while onboarding the tenant (Administration Portal > Tenants > Add Tenant > Tenant Properties > Cloud Breakout Settings). |
Detail for Cloud-Breakout-Setting-Name pane |
Phase 1 Parameters |
||
Encryption Type |
The encryption type for IPsec proposals. |
Detail for Cloud-Breakout-Setting-Name pane |
Authentication Type |
The IPsec authentication algorithm for security association. |
Detail for Cloud-Breakout-Setting-Name pane |
DH Group |
The Diffie-Hellman (DH) group. |
Detail for Cloud-Breakout-Setting-Name pane |
Phase 2 Parameters |
||
Encryption Type |
The encryption type for IPsec proposals. |
Detail for Cloud-Breakout-Setting-Name pane |
Authentication Type |
The IPsec authentication algorithm for security association. |
Detail for Cloud-Breakout-Setting-Name pane |