Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring the Control Node with BGP

An important task after a successful installation is to configure the control node with BGP. This procedure shows how to configure basic BGP peering between one or more virtual network controller control nodes and any external BGP speakers. External BGP speakers, such as Juniper Networks MX80 routers, are needed for connectivity to instances on the virtual network from an external infrastructure or a public network.

Before you begin, ensure that the following tasks are completed:

  • The Contrail Controller base system image has been installed on all servers.

  • The role-based services have been assigned and provisioned.

  • IP connectivity has been verified between all nodes of the Contrail Controller.

  • You can access the Contrail user interface at http://nn.nn.nn.nn:8143, where nn.nn.nn.nn is the IP address of the configuration node server that is running the contrail-webui service.

To configure BGP peering in the control node:

  1. From the Contrail Controller module control node (http://nn.nn.nn.nn:8143), select Configure > Infrastructure > BGP Routers; see Figure 1.

    Figure 1: Configure> Infrastructure > BGP RoutersConfigure> Infrastructure > BGP Routers

    A summary screen of the control nodes and BGP routers is displayed; see Figure 2.

    Figure 2: BGP Routers Summary BGP Routers Summary
  2. (Optional) The global AS number is 64512 by default. To change the AS number, on the BGP Router summary screen click the gear wheel and select Edit. In the Edit BGP Router window enter the new number.
  3. To create control nodes and BGP routers, on the BGP Routers summary screen, click the icon. The Create BGP Router window is displayed; see Figure 3.
    Figure 3: Create BGP RouterCreate BGP Router
  4. In the Create BGP Router window, click BGP Router to add a new BGP router or click Control Node to add control nodes.

    For each node you want to add, populate the fields with values for your system. See Table 1.

    Table 1: Create BGP Router Fields

    Field

    Description

    Hostname

    Enter a name for the node being added.

    Vendor ID

    Required for external peers. Populate with a text identifier, for example, “MX-0”. (BGP peer only)

    IP Address

    The IP address of the node.

    Router ID

    Enter the router ID.

    Autonomous System

    Enter the AS number for the node. (BGP peer only)

    Address Families

    Enter the address family, for example, inet-vpn

    Hold Time

    BGP session hold time. The default is 90 seconds; change if needed.

    BGP Port

    The default is 179; change if needed.

    Authentication Mode

    Enable MD5 authentication if desired.

    Authentication key

    Enter the Authentication Key value.

    Physical Router

    The type of the physical router.

    Available Peers

    Displays peers currently available.

    Configured Peers

    Displays peers currently configured.

  5. Click Save to add each node that you create.
  6. To configure an existing node as a peer, select it from the list in the Available Peers box, then click >> to move it into the Configured Peers box.

    Click << to remove a node from the Configured Peers box.

  7. You can check for peers by selecting Monitor > Infrastructure > Control Nodes; see Figure 4.
    Figure 4: Control NodesControl Nodes

    In the Control Nodes window, click any hostname in the memory map to view its details; see Figure 5.

    Figure 5: Control Node DetailsControl Node Details
  8. Click the Peers tab to view the peers of a control node; see Figure 6.
    Figure 6: Control Node Peers TabControl Node Peers Tab