Aggregate of Network Device Entities
Each network device has multiple entities such as interfaces, kernel, power, fan, and so on. Contrail Insights supports creation of aggregate of network device entities.
Charts are viewable for the aggregate.
Both static and dynamic rules are supported.
SLA health and risk profiles for the aggregate are supported.
Create an Aggregate of Network Device Entities
To create an aggregate of network device entities:
From the Contrail Insights Dashboard, select Aggregates from the drop-down list.
Figure 1: Create Aggregates from Dashboard
Select Update Aggregates.
Figure 2: Update Aggregates from Dashboard
Select New Aggregate.
Figure 3: Configure New Aggregate
Select the Aggregate type as Network Device Entities.
Figure 4: Select Aggregate Type from Dashboard
Select the network devices you want to monitor by choosing from the Resource drop-down list.
Figure 5: Select Network Devices to Monitor
Select the entity type to create an aggregate for.
Figure 6: Aggregates Entity Types
Select the entities that are to be monitored.
Figure 7: Select Entities to Monitor
Click Create to create the aggregate.
Figure 8: Create Aggregate - Dashboard View
View Charts for Aggregate of Network Device Entities
From the Contrail Insights Dashboard, select Infrastructure > Aggregates. Then select the aggregate you created.
Figure 9: Select a Created Aggregate
The members of the aggregate are displayed. Select Charts to view charts.
Figure 10: View Members of Aggregate
If there are multiple sources, for example, SNMP, GRPC, JTI, select the one you want to view charts for.
Figure 11: Select Source for Chart Display
After selecting a source, charts are displayed. To view charts for other sources, select the source from the drop down.
Figure 12: Aggregate Charts
Figure 13: Select a Different Source from Charts