Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring the Aggregation Method for Viewing Monitoring Details

On the pages in Monitor mode of the Connectivity Services Director GUI that display statistical information and counters for traffic flow and packets across peer devices for various services and device configuration settings, you can select the aggregation or cumulative method that must be used for computing and displaying statistics. You can also modify the application settings to display the aggregation of traffic.

The following two aggregation values are supported:

  • Total—Sum of the number of packets received in the interval

  • Average—Average of the total number of packets received in the interval

You can set the aggregation method from the Junos Space Platform GUI or the Connectivity Services Director GUI.

To configure the aggregation method from the Junos Space Platform GUI:

  1. From the Network Management Platform task pane, select Administration > Applications.

    The Applications page that appears displays a list of the applications in the Network Management platform.

  2. Right-click Connectivity Services Director and select Modify Applications Settings.

    The Modify Application Settings page that appears displays a list of the parameters that can be modified.

  3. Click the Monitoring button to specify the settings.

    Note:

    You cannot modify the application settings if another user is currently modifying them.

  4. Select the Perform Monitoring on failed Functional Audit check box if you want the monitoring functionality to be enabled for services for which functional audit failed. Otherwise, monitoring data is displayed in the widgets in Monitor mode of Service View only on services for which functional audit succeeded.

  5. In the Pseudowire Redundancy Transition TimeDelay field, specify the number of minutes after which a remote procedure call (RPC) must be sent from Connectivity Services Director to the device on which redundant pseudowires are configured for monitoring data to be collected.

    By default, an RPC call is initiated every 2 minutes.

  6. From the Statistics Aggregation Reporting list, select Total or Average.

    The value of the aggregation method determines the manner in which the aggregated results are returned for a query that polls and retrieves data from devices.

  7. Click Modify to save the changes that you made in the Connectivity Services Director application. Alternatively, click Cancel to retain the original settings.

    The aggregation method setting is modified.

To configure the aggregation method from the Connectivity Services Director GUI:

  1. To open the Preferences page, click the down arrow next to the System button on the Connectivity Services Director banner and select Preferences.

    The Preferences page opens with User Preferences as the default tab.

  2. Click the Service Activation tab.

    The settings that you can configure for services activation are displayed.

  3. From the Statistics Aggregation Reporting list, select Total or Average.

    The aggregation method that you specified is used for computation of values on the monitoring pages.

  4. Click OK to save the changes. Alternatively, click Cancel to discard the changes.

    The aggregation method setting is saved.

    Note:

    For the charts and tables displayed in Monitor mode of Service View, you can specify the polling interval and enable or disable the following collectors:

    • ProvisioningMonitorInterfaceStatusCollector—Defines the polling interval for monitoring the interface status

    • ProvisioningMonitorInterfaceStatsCollector—Defines the polling interval for monitoring the interface statistics

    • ProvisioningMonitorServiceStatusCollector—Defines the polling interval for monitoring the service status

    • ProvisioningMonitorLDPStatsCollector—Defines the polling interval for monitoring the LDP statistics

    • ProvisioningMonitorY1731PMCollector—Defines the polling interval for monitoring the performance management or Y.1731 statistics

    • ProvisioningMonitorLSPStatsCollector—Defines the polling interval for monitoring the LSP statistics