Configuring L2 HA Link Encryption tunnel
Physically connect the two devices and ensure that they are the same models. Connect the dedicated control ports on node 0 and node 1. Connect the user defined fabricated ports on node 0 and node 1. To configure two chassis in cluster mode, follow the below steps:
-
Zeroize both the
SRX
Series Firewalls before you use for cluster. If the devices are
already in cluster mode please make sure you disable them before the zeroize process.
For information on how to disable chassis cluster, see Disabling a Chassis Cluster.
user@host> request system zeroize
-
Delete the web management services.
user@host# delete system services web-management
-
Configure FIPS mode and bring up the devices in FIPS mode.
[edit] user@host# set groups global system fips level 2 [edit] user@host# set groups global system root-authentication plain-textpassword New password: type password here Retype new password: retype password here [edit] user@host# commit user@host> request system reboot -
Configure device 1 with standard cluster commands for operating in cluster mode as
node0 with control port configuration. See Chassis Cluster Control Plane Interfaces.
[edit] user@host# set groups node0 system host-name node0-host-name user@host# set groups node0 system backup-router gateway-address user@host# set groups node0 system backup-router destination value user@host# set groups node0 interfaces fxp0 unit 0 family inet address node0-ipaddress user@host# set groups node1 system host-name node1-host-name user@host# set groups node1 system backup-router gateway-address user@host# set groups node1 system backup-router destination value user@host# set groups node1 interfaces fxp0 unit 0 family inet address node1-ipaddress user@host# set apply-groups global user@host# set apply-groups "$(node)" user@host# delete apply-groups re0 user@host# set system ports console log-out-on-disconnect user@host# set chassis cluster reth-count 5 user@host# set chassis cluster redundancy-group 0 node 0 priority 254 user@host# set chassis cluster redundancy-group 0 node 1 priority 1 user@host# commit user@host> set chassis cluster cluster-id 1 node 0 reboot
-
After the device 1 is up, configure HA link encryption as shown in sample
configuration below, commit and reboot. Device 1 needs to be configured with both node0
and node1 HA link encryption configuration before commit and reboot.
[edit] user@host# set groups node0 security ike traceoptionsfile ikelog user@host# set groups node0 security ike traceoptions file size 100m user@host# set groups node0 security ike traceoptions flag all user@host# set groups node0 security ike traceoptions level 15 user@host# set groups node0 security ike proposal IKE_PROP_PSK authentication-method preshared- keys user@host# set groups node0 security ike proposal IKE_PROP_PSK dh-group group20 user@host# set groups node0 security ike proposal IKE_PROP_PSK authentication-algorithm sha-256 user@host# set groups node0 security ike proposal IKE_PROP_PSK encryption-algorithm aes-256- cbc user@host# set groups node0 security ike policy IKE_POL_PSK proposals IKE_PROP_PSK user@host# prompt groups node0 security ike policy IKE_POL_PSK pre-shared-key ascii-text New ascii-text (secret): juniper Retype new ascii-text (secret): juniper user@host# set groups node0 security ike gateway S2S_GW ike-policy IKE_POL_PSK user@host# set groups node0 security ike gateway S2S_GW version v2-only user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK protocol esp user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK authentication-algorithm hmac-sha1-96 user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK encryption-algorithm aes-256-cbc user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK lifetime-seconds 200 user@host# set groups node0 security ipsec policy IPSEC_POL_PSK perfect-forward-secrecy keys group20 user@host# set groups node0 security ipsec policy IPSEC_POL_PSK proposal IPSEC_PROP_PSK user@host# set groups node0 security ipsec vpn S2S_VPN ha-link-encryption user@host# set groups node0 security ipsec vpn S2S_VPN ike gateway S2S_GW user@host# set groups node0 security ipsec vpn S2S_VPN ike ipsec-policy IPSEC_POL_PSK user@host# set groups node1 security ike traceoptions file ikelog user@host# set groups node1 security ike traceoptions file size 100m user@host# set groups node1 security ike traceoptions flag all user@host# set groups node1 security ike traceoptions level 15 user@host# set groups node1 security ike proposal IKE_PROP_PSK authentication-method preshared- keys user@host# set groups node1 security ike proposal IKE_PROP_PSK dh-group group20 user@host# set groups node1 security ike proposal IKE_PROP_PSK authentication-algorithm sha-256 user@host# set groups node1 security ike proposal IKE_PROP_PSK encryption-algorithm aes-256- cbc user@host# set groups node1 security ike policy IKE_POL_PSK proposals IKE_PROP_PSK user@host# prompt groups node1 security ike policy IKE_POL_PSK pre-shared-key ascii-text New ascii-text(secret): juniper Retype new ascii-text (secret): juniper user@host# set groups node1 security ike gateway S2S_GW ike-policy IKE_POL_PSK user@host# set groups node1 security ike gateway S2S_GW version v2-only user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK protocol esp user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK authentication-algorithm hmac-sha1-96 user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK encryption-algorithm aes-256-cbc user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK lifetime-seconds 200 user@host# set groups node1 security ipsec policy IPSEC_POL_PSK perfect-forward-secrecy keys group20 user@host# set groups node1 security ipsec policy IPSEC_POL_PSK proposals IPSEC_PROP_PSK user@host# set groups node1 security ipsec vpn S2S_VPN ha-link-encryption user@host# set groups node1 security ipsec vpn S2S_VPN ike gateway S2S_GW user@host# set groups node1 security ipsec vpn S2S_VPN ike ipsec-policy IPSEC_POL_PSK user@host# set groups global interfaces fab0 fabric-options member-interfaces ge-0/0/3 user@host# set groups global interfaces fab1 fabric-options member-interfaces ge-5/0/3 user@host# commit user@host> request system reboot
- To proceed further with device 2 configuration and commit, you need to ensure device 1 and device 2 are not reachable to each other. One way to achieve this is to power off device 1 at this point.
-
Configure device 2 with standard cluster commands for operating in cluster mode as
node1 with control port configuration. See Chassis Cluster Control Plane Interfaces.
[edit] user@host# set groups node0 system host-name node0-host-name user@host# set groups node0 system backup-router gateway-address user@host# set groups node0 system backup-router destination value user@host# set groups node0 interfaces fxp0 unit 0 family inet address node0-ip-address user@host# set groups node1 system host-name node1-host-name user@host# set groups node1 system backup-router gateway-address user@host# set groups node1 system backup-router destination value user@host# set groups node1 interfaces fxp0 unit 0 family inet address node1-ip-address user@host# set apply-groups global user@host# set apply-groups "$(node)" user@host# delete apply-groups re0 user@host# set system ports console log-out-on-disconnect user@host# set chassis cluster reth-count 5 user@host# set chassis cluster redundancy-group 0 node 0 priority 254 user@host# set chassis cluster redundancy-group 0 node 1 priority 1 user@host# commit user@host> set chassis cluster cluster-id 1 node 1 reboot
-
After the device 2 is up, configure HA link encryption as shown in sample
configuration below on device 2. Device 2 needs to be configured with both node0 and node1
HA link encryption configuration. Commit on node1 (device 2), and finally reboot node1
(device 2).
[edit] user@host# set groups node0 security ike traceoptions file ikelog user@host# set groups node0 security ike traceoptions file size 100m user@host# set groups node0 security ike traceoptions flag all user@host# set groups node0 security ike traceoptions level 15 user@host# set groups node0 security ike proposal IKE_PROP_PSK authentication-method preshared- keys user@host# set groups node0 security ike proposal IKE_PROP_PSK dh-group group20 user@host# set groups node0 security ike proposal IKE_PROP_PSK authentication-algorithm sha-256 user@host# set groups node0 security ike proposal IKE_PROP_PSK encryption-algorithm aes-256- cbc user@host# set groups node0 security ike policy IKE_POL_PSK proposals IKE_PROP_PSK user@host# prompt groups node0 security ike policy IKE_POL_PSK pre-shared-key ascii-text New ascii-text (secret): juniper Retype new ascii-text (secret): juniper user@host# set groups node0 security ike gateway S2S_GW ike-policy IKE_POL_PSK user@host# set groups node0 security ike gateway S2S_GW version v2-only user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK protocol esp user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK authentication-algorithm hmac-sha1-96 user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK encryption-algorithm aes-256-cbc user@host# set groups node0 security ipsec proposal IPSEC_PROP_PSK lifetime-seconds 200 user@host# set groups node0 security ipsec policy IPSEC_POL_PSK perfect-forward-secrecy keys group20 user@host# set groups node0 security ipsec policy IPSEC_POL_PSK proposal IPSEC_PROP_PSK user@host# set groups node0 security ipsec vpn S2S_VPN ha-link-encryption user@host# set groups node0 security ipsec vpn S2S_VPN ike gateway S2S_GW user@host# set groups node0 security ipsec vpn S2S_VPN ike ipsec-policy IPSEC_POL_PSK user@host# set groups node1 security ike traceoptions file ikelog user@host# set groups node1 security ike traceoptions file size 100m user@host# set groups node1 security ike traceoptions flag all user@host# set groups node1 security ike traceoptions level 15 user@host# set groups node1 security ike proposal IKE_PROP_PSK authentication-method preshared- keys user@host# set groups node1 security ike proposal IKE_PROP_PSK dh-group group20 user@host# set groups node1 security ike proposal IKE_PROP_PSK authentication-algorithm sha-256 user@host# set groups node1 security ike proposal IKE_PROP_PSK encryption-algorithm aes-256- cbc user@host# set groups node1 security ike policy IKE_POL_PSK proposals IKE_PROP_PSK user@host# prompt groups node1 security ike policy IKE_POL_PSK pre-shared-key ascii-text New ascii-text(secret): juniper Retype new ascii-text (secret): juniper user@host# set groups node1 security ike gateway S2S_GW ike-policy IKE_POL_PSK user@host# set groups node1 security ike gateway S2S_GW version v2-only user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK protocol esp user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK authentication-algorithm hmac-sha1-96 user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK encryption-algorithm aes-256-cbc user@host# set groups node1 security ipsec proposal IPSEC_PROP_PSK lifetime-seconds 200 user@host# set groups node1 security ipsec policy IPSEC_POL_PSK perfect-forward-secrecy keys group20 user@host# set groups node1 security ipsec policy IPSEC_POL_PSK proposals IPSEC_PROP_PSK user@host# set groups node1 security ipsec vpn S2S_VPN ha-link-encryption user@host# set groups node1 security ipsec vpn S2S_VPN ike gateway S2S_GW user@host# set groups node1 security ipsec vpn S2S_VPN ike ipsec-policy IPSEC_POL_PSK user@host# set groups global interfaces fab0 fabric-options member-interfaces ge-0/0/3 user@host# set groups global interfaces fab1 fabric-options member-interfaces ge-5/0/3 user@host# commit user@host> request system reboot