Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpack the SSR400 Routers

Unpack the SSR400 Router by following the recommended procedure and check that you have received all the components.

Unpack the SSR400 Routers

We ship the SSR400 Routers in a cardboard carton, secured with foam packing material.

CAUTION:

SSR400 routers have maximum protection inside the shipping carton. Do not unpack the device until you are ready to mount it.

To unpack the device and prepare for installation, you need the following tools:

  • A Phillips (+) screwdriver, number 2

  • A box cutter or packing knife to slice open the tape that seals the boxes

To unpack the device:

  1. Move the shipping carton to a staging area as close to the installation site as possible. Also ensure that this area provides you with enough room to remove the device and its components.

  2. Position the carton so that the arrows marked on the carton are pointing up.

  3. Open the top flaps on the shipping carton.

  4. Pull out the packing material holding the device in place.

  5. Verify the parts received against the packing list as mentioned in Packing List for the SSR400 Routers.

  6. Save the shipping carton and packing materials in case you need to move or ship the device later.

Packing List for the SSR400 Routers

The shipment includes a packing list. Check the parts you receive in the shipping carton against the items on the packing list. We ship the parts as per the configuration that you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1: Parts List for the SSR400 Router
Component Part Number Quantity

Chassis

SSR400

1

Rubber feet

—

4

Power supply adapter (PSA) and power cord

—

1

Rack mount kit (separately orderable)

  • One power adaptor tray

  • Four cable ties

  • Four M4 screws

SSR400-RMK

1

Documentation roadmap

—

1
Table 2: Parts List for the SSR400-C Router
Component Part Number Quantity

Chassis

SSR400-C

1

Rubber feet

—

4

Power supply adapter (PSA) and power cord

—

1

Rack mount kit (separately orderable)

  • One power adaptor tray

  • Four cable ties

  • Four M4 screws

SSR400-RMK

1

Antennas

SSR400-5G-ANT

or

SSR400-5G-EXT (separately orderable)

4

Documentation roadmap

—

1